Recently I completed a small project, including an embedded microcontroller. For me, using the popular Arduino IDE, and C, was a mistake. The experience with Rust was better, but still very exciting, and not in a good way. Here follows the rant.

• Introduction
• Arduino IDE
• Writing C again
• Rust on the DigiSpark
• RIIR (Rewrite It In Rust)
• An offer of help
• Conclusions

Introduction In a recent project (I ll write about the purpose, and the hardware in another post) I chose to use a DigiSpark board. This is a small board with a USB-A tongue (but not a proper plug), and an ATTiny85 microcontroller, This chip has 8 pins and is quite small really, but it was plenty for my application. By choosing something popular, I hoped for convenient hardware, and an uncomplicated experience. Convenient hardware, I got. Arduino IDE The usual way to program these boards is via an IDE. I thought I d go with the flow and try that. I knew these were closely related to actual Arduinos and saw that the IDE package arduino was in Debian. But it turns out that the Debian package s version doesn t support the DigiSpark. (AFAICT from the list it offered me, I m not sure it supports any ATTiny85 board.) Also, disturbingly, its board manager seemed to be offering to install board support, suggesting it would download stuff from the internet and run it. That wouldn t be acceptable for my main laptop. I didn t expect to be doing much programming or debugging, and the project didn t have significant security requirements: the chip, in my circuit, has only a very narrow ability do anything to the real world, and no network connection of any kind. So I thought it would be tolerable to do the project on my low-security video laptop . That s the machine where I m prepared to say yes to installing random software off the internet. So I went to the upstream Arduino site and downloaded a tarball containing the Arduino IDE. After unpacking that in /opt it ran and produced a pointy-clicky IDE, as expected. I had already found a 3rd-party tutorial saying I needed to add a magic URL (from the DigiSpark s vendor) in the preferences. That indeed allowed it to download a whole pile of stuff. Compilers, bootloader clients, god knows what. However, my tiny test program didn t make it to the board. Half-buried in a too-small window was an error message about the board s bootloader ( Micronucleus ) being too new. The boards I had came pre-flashed with micronucleus 2.2. Which is hardly new, But even so the official Arduino IDE (or maybe the DigiSpark s board package?) still contains an old version. So now we have all the downsides of curl bash-ware, but we re lacking the it s up to date and it just works upsides. Further digging found some random forum posts which suggested simply downloading a newer micronucleus and manually stuffing it into the right place: one overwrites a specific file, in the middle the heaps of stuff that the Arduino IDE s board support downloader squirrels away in your home directory. (In my case, the home directory of the untrusted shared user on the video laptop,) So, whatever . I did that. And it worked! Having demo d my ability to run code on the board, I set about writing my program. Writing C again The programming language offered via the Arduino IDE is C. It s been a little while since I started a new thing in C. After having spent so much of the last several years writing Rust. C s primitiveness quickly started to grate, and the program couldn t easily be as DRY as I wanted (Don t Repeat Yourself, see Wilson et al, 2012, 4, p.6). But, I carried on; after all, this was going to be quite a small job. Soon enough I had a program that looked right and compiled. Before testing it in circuit, I wanted to do some QA. So I wrote a simulator harness that #included my Arduino source file, and provided imitations of the few Arduino library calls my program used. As an side advantage, I could build and run the simulation on my main machine, in my normal development environment (Emacs, make, etc.). The simulator runs confirmed the correct behaviour. (Perhaps there would have been some more faithful simulation tool, but the Arduino IDE didn t seem to offer it, and I wasn t inclined to go further down that kind of path.) So I got the video laptop out, and used the Arduino IDE to flash the program. It didn t run properly. It hung almost immediately. Some very ad-hoc debugging via led-blinking (like printf debugging, only much worse) convinced me that my problem was as follows: Arduino C has 16-bit ints. My test harness was on my 64-bit Linux machine. C was autoconverting things (when building for the micrcocontroller). The way the Arduino IDE ran the compiler didn t pass the warning options necessary to spot narrowing implicit conversions. Those warnings aren t the default in C in general because C compilers hate us all for compatibility reasons. I don t know why those warnings are not the default in the Arduino IDE, but my guess is that they didn t want to bother poor novice programmers with messages from the compiler explaining how their program is quite possibly wrong. After all, users don t like error messages so we shouldn t report errors. And novice programmers are especially fazed by error messages so it s better to just let them struggle themselves with the arcane mysteries of undefined behaviour in C? The Arduino IDE does offer a dropdown for compiler warnings . The default is None. Setting it to All didn t produce anything about my integer overflow bugs. And, the output was very hard to find anyway because the log window has a constant stream of strange messages from javax.jmdns, with hex DNS packet dumps. WTF. Other things that were vexing about the Arduino IDE: it has fairly fixed notions (which don t seem to be documented) about how your files and directories ought to be laid out, and magical machinery for finding things you put nearby its sketch (as it calls them) and sticking them in its ear, causing lossage. It has a tendency to become confused if you edit files under its feet (e.g. with git checkout). It wasn t really very suited to a workflow where principal development occurs elsewhere. And, important settings such as the project s clock speed, or even the target board, or the compiler warning settings to use weren t stored in the project directory along with the actual code. I didn t look too hard, but I presume they must be in a dotfile somewhere. This is madness. Apparently there is an Arduino CLI too. But I was already quite exasperated, and I didn t like the idea of going so far off the beaten path, when the whole point of using all this was to stay with popular tooling and share fate with others. (How do these others cope? I have no idea.) As for the integer overflow bug: I didn t seriously consider trying to figure out how to control in detail the C compiler options passed by the Arduino IDE. (Perhaps this is possible, but not really documented?) I did consider trying to run a cross-compiler myself from the command line, with appropriate warning options, but that would have involved providing (or stubbing, again) the Arduino/DigiSpark libraries (and bugs could easily lurk at that interface). Instead, I thought, if only I had written the thing in Rust . But that wasn t possible, was it? Does Rust even support this board? Rust on the DigiSpark I did a cursory web search and found a very useful blog post by Dylan Garrett. This encouraged me to think it might be a workable strategy. I looked at the instructions there. It seemed like I could run them via the privsep arrangement I use to protect myself when developing using upstream cargo packages from crates.io. I got surprisingly far surprisingly quickly. It did, rather startlingly, cause my rustup to download a random recent Nightly Rust, but I have six of those already for other Reasons. Very quickly I got the trinket LED blink example, referenced by Dylan s blog post, to compile. Manually copying the file to the video laptop allowed me to run the previously-downloaded micronucleus executable and successfully run the blink example on my board! I thought a more principled approach to the bootloader client might allow a more convenient workflow. I found the upstream Micronucleus git releases and tags, and had a look over its source code, release dates, etc. It seemed plausible, so I compiled v2.6 from source. That was a success: now I could build and install a Rust program onto my board, from the command line, on my main machine. No more pratting about with the video laptop. I had got further, more quickly, with Rust, than with the Arduino IDE, and the outcome and workflow was superior. So, basking in my success, I copied the directory containing the example into my own project, renamed it, and adjusted the path references. That didn t work. Now it didn t build. Even after I copied about .cargo/config.toml and rust-toolchain.toml it didn t build, producing a variety of exciting messages, depending what precisely I tried. I don t have detailed logs of my flailing: the instructions say to build it by cd ing to the subdirectory, and, given that what I was trying to do was to not follow those instructions, it didn t seem sensible to try to prepare a proper repro so I could file a ticket. I wasn t optimistic about investigating it more deeply myself: I have some experience of fighting cargo, and it s not usually fun. Looking at some of the build control files, things seemed quite complicated. Additionally, not all of the crates are on crates.io. I have no idea why not. So, I would need to supply local copies of them anyway. I decided to just git subtree add the avr-hal git tree. (That seemed better than the approach taken by the avr-hal project s cargo template, since that template involve a cargo dependency on a foreign git repository. Perhaps it would be possible to turn them into path dependencies, but given that I had evidence of file-location-sensitive behaviour, which I didn t feel like I wanted to spend time investigating, using that seems like it would possibly have invited more trouble. Also, I don t like package templates very much. They re a form of clone-and-hack: you end up stuck with whatever bugs or oddities exist in the version of the template which was current when you started.) Since I couldn t get things to build outside avr-hal, I edited the example, within avr-hal, to refer to my (one) program.rs file outside avr-hal, with a #[path] instruction. That s not pretty, but it worked. I also had to write a nasty shell script to work around the lack of good support in my nailing-cargo privsep tool for builds where cargo must be invoked in a deep subdirectory, and/or Cargo.lock isn t where it expects, and/or the target directory containing build products is in a weird place. It also has to filter the output from cargo to adjust the pathnames in the error messages. Otherwise, running both cd A; cargo build and cd B; cargo build from a Makefile produces confusing sets of error messages, some of which contain filenames relative to A and some relative to B, making it impossible for my Emacs to reliably find the right file. RIIR (Rewrite It In Rust) Having got my build tooling sorted out I could go back to my actual program. I translated the main program, and the simulator, from C to Rust, more or less line-by-line. I made the Rust version of the simulator produce the same output format as the C one. That let me check that the two programs had the same (simulated) behaviour. Which they did (after fixing a few glitches in the simulator log formatting). Emboldened, I flashed the Rust version of my program to the DigiSpark. It worked right away! RIIR had caused the bug to vanish. Of course, to rewrite the program in Rust, and get it to compile, it was necessary to be careful about the types of all the various integers, so that s not so surprising. Indeed, it was the point. I was then able to refactor the program to be a bit more natural and DRY, and improve some internal interfaces. Rust s greater power, compared to C, made those cleanups easier, so making them worthwhile. However, when doing real-world testing I found a weird problem: my timings were off. Measured, the real program was too fast by a factor of slightly more than 2. A bit of searching (and searching my memory) revealed the cause: I was using a board template for an Adafruit Trinket. The Trinket has a clock speed of 8MHz. But the DigiSpark runs at 16.5MHz. (This is discussed in a ticket against one of the C/C++ libraries supporting the ATTiny85 chip.) The Arduino IDE had offered me a choice of clock speeds. I have no idea how that dropdown menu took effect; I suspect it was adding prelude code to adjust the clock prescaler. But my attempts to mess with the CPU clock prescaler register by hand at the start of my Rust program didn t bear fruit. So instead, I adopted a bodge: since my code has (for code structure reasons, amongst others) only one place where it dealt with the underlying hardware s notion of time, I simply changed my delay function to adjust the passed-in delay values, compensating for the wrong clock speed. There was probably a more principled way. For example I could have (re)based my work on either of the two unmerged open MRs which added proper support for the DigiSpark board, rather than abusing the Adafruit Trinket definition. But, having a nearly-working setup, and an explanation for the behaviour, I preferred the narrower fix to reopening any cans of worms. An offer of help As will be obvious from this posting, I m not an expert in dev tools for embedded systems. Far from it. This area seems like quite a deep swamp, and I m probably not the person to help drain it. (Frankly, much of the improvement work ought to be done, and paid for, by hardware vendors.) But, as a full Member of the Debian Project, I have considerable gatekeeping authority there. I also have much experience of software packaging, build systems, and release management. If anyone wants to try to improve the situation with embedded tooling in Debian, and is willing to do the actual packaging work. I would be happy to advise, and to review and sponsor your contributions. An obvious candidate: it seems to me that micronucleus could easily be in Debian. Possibly a DigiSpark board definition could be provided to go with the arduino package. Unfortunately, IMO Debian s Rust packaging tooling and workflows are very poor, and the first of my suggestions for improvement wasn t well received. So if you need help with improving Rust packages in Debian, please talk to the Debian Rust Team yourself. Conclusions Embedded programming is still rather a mess and probably always will be. Embedded build systems can be bizarre. Documentation is scant. You re often expected to download board support packages full of mystery binaries, from the board vendor (or others). Dev tooling is maddening, especially if aimed at novice programmers. You want version control? Hermetic tracking of your project s build and install configuration? Actually to be told by the compiler when you write obvious bugs? You re way off the beaten track. As ever, Free Software is under-resourced and the maintainers are often busy, or (reasonably) have other things to do with their lives. All is not lost Rust can be a significantly better bet than C for embedded software: The Rust compiler will catch a good proportion of programming errors, and an experienced Rust programmer can arrange (by suitable internal architecture) to catch nearly all of them. When writing for a chip in the middle of some circuit, where debugging involves staring an LED or a multimeter, that s precisely what you want. Rust embedded dev tooling was, in this case, considerably better. Still quite chaotic and strange, and less mature, perhaps. But: significantly fewer mystery downloads, and significantly less crazy deviations from the language s normal build system. Overall, less bad software supply chain integrity. The ATTiny85 chip, and the DigiSpark board, served my hardware needs very well. (More about the hardware aspects of this project in a future posting.)

comments

My previously mentioned C.H.I.P. repurposing has been partly successful; I ve found a use for it (which I still need to write up), but unfortunately it s too useful and the fact it s still a bit flaky has become a problem. I spent a while trying to isolate exactly what the problem is (I m still seeing occasional hard hangs with no obvious debug output in the logs or on the serial console), then realised I should just buy one of the cheap ARM SBC boards currently available. The C.H.I.P. is based on an Allwinner R8, which is a single ARM v7 core (an A8). So it s fairly low power by today s standards and it seemed pretty much any board would probably do. I considered a Pi 2 Zero, but couldn t be bothered trying to find one in stock at a reasonable price (I ve had one on backorder from CPC since May 2022, and yes, I know other places have had them in stock since but I don t need one enough to chase and I m now mostly curious about whether it will ever ship). As the title of this post gives away, I settled on a Banana Pi BPI-M2 Zero, which is based on an Allwinner H3. That s a quad-core ARM v7 (an A7), so a bit more oompfh than the C.H.I.P. All in all it set me back 25, including a set of heatsinks that form a case around it. I started with the vendor provided Debian SD card image, which is based on Debian 9 (stretch) and so somewhat old. I was able to dist-upgrade my way through buster and bullseye, and end up on bookworm. I then discovered the bookworm 6.1 kernel worked just fine out of the box, and even included a suitable DTB. Which got me thinking about whether I could do a completely fresh Debian install with minimal tweaking. First thing, a boot loader. The Allwinner chips are nice in that they ll boot off SD, so I just needed a suitable u-boot image. Rather than go with the vendor image I had a look at mainline and discovered it had support! So let s build a clean image: I had the advantage here of already having a host setup to cross build armhf binaries, but this was all done on a Debian bookworm host with packages from main. I ve put my build up here in case it s useful to someone - everything else below can be done on a normal x86_64 host. Next I needed a Debian installer. I went for the netboot variant - although I was writing it to SD rather than TFTP booting I wanted as much as possible to come over the network. Then I took a suitable microSD card and set it up with a 500M primary VFAT partition, leaving the rest for Linux proper. I could have got away with a smaller VFAT partition but I d initially thought I might need to put some more installation files on it. The bootloader image gets written 8k into the SD card (our first partition starts at sector 2048, i.e. 1M into the device, so there s plenty of space here): Copy the Debian installer files onto the VFAT partition: Unmount the SD from the build host, pop it into the M2 Zero, boot it up while connected to the serial console, hit a key to stop autoboot and tell it to boot the installer: At this point the installer runs and you can do a normal install. Well, except the wifi wasn t detected, I think because the netinst images don t include firmware. I spent a bit of time trying to figure out how to include it but ultimately ended up installing over a USB ethernet dongle, which Just Worked and was less faff. Installing firmware-brcm80211 once installation completed allowed the built-in wifi to work fine. After install you need to configure u-boot to boot without intervention. At the u-boot prompt (i.e. after hitting a key to stop autoboot): This is assuming you have /boot on partition 2 on the SD - I left the first partition as VFAT (that s where the u-boot environment will be saved) and just used all of the rest as a single ext4 partition. I did have to do an e2label /dev/sdb2 BPI-ROOT to label / appropriately; otherwise I occasionally saw the SD card appear as mmc1 for Linux (I m guessing due to asynchronous boot order with the wifi). You should now find the device boots without intervention.

Welcome to the September 2023 report from the Reproducible Builds project In these reports, we outline the most important things that we have been up to over the past month. As a quick recap, whilst anyone may inspect the source code of free software for malicious flaws, almost all software is distributed to end users as pre-compiled binaries.
Andreas Herrmann gave a talk at All Systems Go 2023 titled Fast, correct, reproducible builds with Nix and Bazel . Quoting from the talk description:

You will be introduced to Google s open source build system Bazel, and will learn how it provides fast builds, how correctness and reproducibility is relevant, and how Bazel tries to ensure correctness. But, we will also see where Bazel falls short in ensuring correctness and reproducibility. You will [also] learn about the purely functional package manager Nix and how it approaches correctness and build isolation. And we will see where Bazel has an advantage over Nix when it comes to providing fast feedback during development.

Andreas also shows how you can get the best of both worlds and combine Nix and Bazel, too. A video of the talk is available.
diffoscope is our in-depth and content-aware diff utility that can locate and diagnose reproducibility issues. This month, Chris Lamb fixed compatibility with file(1) version 5.45 [ ] and updated some documentation [ ]. In addition, Vagrant Cascadian extended support for GNU Guix [ ][ ] and updated the version in that distribution as well. [ ].
Yet another reminder that our upcoming Reproducible Builds Summit is set to take place from October 31st November 2nd 2023 in Hamburg, Germany. If you haven t been before, our summits are a unique gathering that brings together attendees from diverse projects, united by a shared vision of advancing the Reproducible Builds effort. During this enriching event, participants will have the opportunity to engage in discussions, establish connections and exchange ideas to drive progress in this vital field. If you re interested in joining us this year, please make sure to read the event page, the news item, or the invitation email that Mattia Rizzolo sent out recently, all of which have more details about the event and location. We are also still looking for sponsors to support the event, so please reach out to the organising team if you are able to help. Also note that PackagingCon 2023 is taking place in Berlin just before our summit.
On the Reproducible Builds website, Greg Chabala updated the JVM-related documentation to update a link to the BUILDSPEC.md file. [ ] And Fay Stegerman fixed the builds failing because of a YAML syntax error.

Distribution work In Debian, this month:

• Debian bug #940234 was originally opened in September 2019 by Aurelien Jarno to request that Debian add a new requirement that repeatedly building the source package in the same environment produces identical .dsc file modulo the GPG signature . This month, however, Russ Allbery closed the bug due to concerns about the viability of source reproducibility.
• 10 reviews of Debian packages were added, 56 were updated and 68 were removed this month adding to our knowledge about identified issues.
• Bastian Blank posted a mail to a number of Debian mailing lists titled Upcoming changes to Debian Linux kernel packages . Under Kernel modules will be signed with an ephemeral key, Bastian wrote: Yes, this will make the build unreproducible, but no better solution currently exists.
• Vagrant Cascadian posted about various experiments with verification builds for Debian and snapshotting the Debian archive

September saw F-Droid add ten new reproducible apps, and one existing app switched to reproducible builds. In addition, two reproducible apps were archived and one was disabled for a current total of 199 apps published with Reproducible Builds and using the upstream developer s signature. [ ] In addition, an extensive blog post was posted on f-droid.org titled Reproducible builds, signing keys, and binary repos .

Upstream patches The Reproducible Builds project detects, dissects and attempts to fix as many currently-unreproducible packages as possible. We endeavour to send all of our patches upstream where appropriate. This month, we wrote a large number of such patches, including:

• openSUSE monthly
• Bernhard M. Wiedemann:
  • linuxsampler (benchmarking issue)
  • antlr3 (date)
  • rpm (embeds too many build details)
  • seamonkey (date)
  • conky (date and ordering-related issue)
  • lsp-plugins-shared (date/copyright year issue)
  • build-compare
  • helix (ASLR-related non-determinism)
  • intel-graphics-compiler (ASLR)
• Chris Lamb:
  • #1052950 filed against sphinxcontrib-mermaid.
  • #1052970 filed against mkdocs-material.
  • #1052989 filed against apophenia.
  • #1053205 filed against lapackpp.
  • #1053263 filed against blaspp.
• Fridrich Strba applied 124 Java-related patches into openSUSE:
  • mysql-connector-java, java-21-openjdk, apache-ivy, maven-assembly-plugin, eclipse, antlr3, groovy18, hbci4java, ini4j, hppc, checkstyle, glassfish-jaxb, tycho, xmvn, mockito, languagetool, json-lib, jnr-unixsocket, jnr-ffi, jnr-enxio, jboss-jaxrs-2.0-api, istack-commons, rxtx-java, glassfish-jaxb, glassfish-hk2, findbugs, docker-client-java, maven, xmvn-connector-ivy, xmlstreambuffer, checkstyle, cglib, bean-validation-api, aws-sdk-java, javapackages-tools, ant, scala, osgi-service-log, jmdns, xml-security, super-csv, osgi-service-jdbc, msv, junit5, jsr-311, jersey, itextpdf, httpcomponents-asyncclient, ed25519-java, jnacl, javaparser, picocli, freemarker, extra166y, javaparser, xstream, woodstox-core, uom-lib, unit-api, uncommons-maths, tycho, treelayout, tiger-types, super-csv, stax-ex, stax2-api, sqlite-jdbc, reflectasm, prometheus-simpleclient-java, powermock, paranamer, opennlp, netty3, mybatis, morfologik-stemming, minlog, maven-archetype, mariadb-java-client, logback, kryo, jsonp, jopt-simple, jnr-posix, jnr-constants, jnr-a64asm, jfreechart, jffi, jetty-schemas, jetty-minimal, jeromq, jctools, jcsp, jboss-websocket-1.0-api, jboss-marshalling, jboss-logmanager, jboss-logging, javaewah, jatl, janino, jackson-modules-base, jackson-jaxrs-providers, jackson-datatypes-collections, jackson-dataformat-xml, jackson-dataformats-text, jackson-dataformats-binary, indriya, google-gson, glassfish-websocket-api, glassfish-transaction-api, glassfish-jsp, glassfish-jax-rs-api, glassfish-hk2, glassfish-fastinfoset, felix-scr, felix-gogo-shell, felix-gogo-command, disruptor, apache-commons-ognl, apache-commons-math, apache-commons-csv, antlr4, jettison, sisu, maven
• Pol Dellaiera:
  • Since version 2.6.4, Composer (the PHP package manager) is now fully reproducible. See the work in the corresponding PR.

Testing framework The Reproducible Builds project operates a comprehensive testing framework (available at tests.reproducible-builds.org) in order to check packages and other artifacts for reproducibility. In August, a number of changes were made by Holger Levsen:

• Disable armhf and i386 builds due to Debian bug #1052257. [ ][ ][ ][ ]
• Run diffoscope with a lower ionice priority. [ ]
• Log every build in a simple text file [ ] and create persistent stamp files when running diffoscope to ease debugging [ ].
• Run schedulers one hour after dinstall again. [ ]
• Temporarily use diffoscope from the host, and not from a schroot running the tested suite. [ ][ ]
• Fail the diffoscope distribution test if the diffoscope version cannot be determined. [ ]
• Fix a spelling error in the email to IRC gateway. [ ]
• Force (and document) the reconfiguration of all jobs, due to the recent rise of zombies. [ ][ ][ ][ ]
• Deal with a rare condition when killing processes which should not be there. [ ]
• Install the Debian backports kernel in an attempt to address Debian bug #1052257. [ ][ ]

In addition, Mattia Rizzolo fixed a call to diffoscope --version (as suggested by Fay Stegerman on our mailing list) [ ], worked on an openQA credential issue [ ] and also made some changes to the machine-readable reproducible metadata, reproducible-tracker.json [ ]. Lastly, Roland Clobus added instructions for manual configuration of the openQA secrets [ ].

---

If you are interested in contributing to the Reproducible Builds project, please visit our Contribute page on our website. However, you can get in touch with us via:

• IRC: #reproducible-builds on irc.oftc.net.
• Mailing list: rb-general@lists.reproducible-builds.org
• Mastodon: @reproducible_builds
• Twitter: @ReproBuilds

Like each month, have a look at the work funded by Freexian s Debian LTS offering.

Debian LTS contributors In September, 21 contributors have been paid to work on Debian LTS, their reports are available:

• Abhijith PA did 10.0h (out of 0h assigned and 14.0h from previous period), thus carrying over 4.0h to the next month.
• Adrian Bunk did 7.0h (out of 17.0h assigned), thus carrying over 10.0h to the next month.
• Anton Gladky did 9.5h (out of 7.5h assigned and 7.5h from previous period), thus carrying over 5.5h to the next month.
• Bastien Roucari s did 16.0h (out of 15.5h assigned and 1.5h from previous period), thus carrying over 1.0h to the next month.
• Ben Hutchings did 17.0h (out of 17.0h assigned).
• Chris Lamb did 17.0h (out of 17.0h assigned).
• Emilio Pozuelo Monfort did 30.0h (out of 30.0h assigned).
• Guilhem Moulin did 18.25h (out of 18.25h assigned).
• Helmut Grohne did 10.0h (out of 10.0h assigned).
• Lee Garrett did 17.0h (out of 16.5h assigned and 0.5h from previous period).
• Markus Koschany did 40.0h (out of 40.0h assigned).
• Ola Lundqvist did 4.5h (out of 0h assigned and 24.0h from previous period), thus carrying over 19.5h to the next month.
• Roberto C. S nchez did 5.0h (out of 12.0h assigned), thus carrying over 7.0h to the next month.
• Santiago Ruano Rinc n did 7.75h (out of 16.0h assigned), thus carrying over 8.25h to the next month.
• Sean Whitton did 7.0h (out of 7.0h assigned).
• Sylvain Beucler did 10.5h (out of 17.0h assigned), thus carrying over 6.5h to the next month.
• Thorsten Alteholz did 14.0h (out of 14.0h assigned).
• Tobias Frost did 13.25h (out of 16.0h assigned), thus carrying over 2.75h to the next month.

Evolution of the situation In September, we have released 44 DLAs. The month of September was a busy month for the LTS Team. A notable security issue fixed in September was the high-severity CVE-2023-4863, a heap buffer overflow that allowed remote attackers to perform an out-of-bounds memory write via a crafted WebP file. This CVE was covered by the three DLAs of different packages: firefox-esr, libwebp and thunderbird. The libwebp backported patch was sent to upstream, who adapted and applied it to the 0.6.1 branch. It is also worth noting that LTS contributor Markus Koschany included in his work updates to packages in Debian Bullseye and Bookworm, that are under the umbrella of the Security Team: xrdp, jetty9 and mosquitto. As every month, there was important behind-the-scenes work by the Front Desk staff, who triaged, analyzed and reviewed dozens of vulnerabilities, to decide if they warrant a security update. This is very important work, since we need to trade-off between the frequency of updates and the stability of the LTS release.

Thanks to our sponsors Sponsors that joined recently are in bold.

• Platinum sponsors:
  • TOSHIBA (for 97 months)
  • Civil Infrastructure Platform (CIP) (for 65 months)
• Gold sponsors:
  • Roche Diagnostics International AG (for 108 months)
  • Linode (for 102 months)
  • Babiel GmbH (for 91 months)
  • Plat Home (for 91 months)
  • University of Oxford (for 47 months)
  • Deveryware (for 34 months)
  • VyOS Inc (for 29 months)
  • EDF SA (for 18 months)
• Silver sponsors:
  • Domeneshop AS (for 112 months)
  • Nantes M tropole (for 106 months)
  • Univention GmbH (for 98 months)
  • Universit Jean Monnet de St Etienne (for 98 months)
  • Ribbon Communications, Inc. (for 92 months)
  • Exonet B.V. (for 82 months)
  • Leibniz Rechenzentrum (for 76 months)
  • CINECA (for 65 months)
  • Minist re de l Europe et des Affaires trang res (for 59 months)
  • Cloudways Ltd (for 49 months)
  • Dinahosting SL (for 47 months)
  • Bauer Xcel Media Deutschland KG (for 41 months)
  • Platform.sh (for 41 months)
  • Moxa Inc. (for 35 months)
  • sipgate GmbH (for 32 months)
  • OVH US LLC (for 30 months)
  • Tilburg University (for 30 months)
  • GSI Helmholtzzentrum f r Schwerionenforschung GmbH (for 21 months)
  • Soliton Systems K.K. (for 19 months)
• Bronze sponsors:
  • Evolix (for 113 months)
  • Seznam.cz, a.s. (for 113 months)
  • Linuxhotel GmbH (for 110 months)
  • Intevation GmbH (for 109 months)
  • Daevel SARL (for 108 months)
  • Bitfolk LTD (for 107 months)
  • Megaspace Internet Services GmbH (for 107 months)
  • Greenbone AG (for 106 months)
  • NUMLOG (for 106 months)
  • WinGo AG (for 106 months)
  • Ecole Centrale de Nantes - LHEEA (for 102 months)
  • Entr ouvert (for 97 months)
  • Adfinis AG (for 94 months)
  • GNI MEDIA (for 89 months)
  • Laboratoire LEGI - UMR 5519 / CNRS (for 89 months)
  • Tesorion (for 89 months)
  • Bearstech (for 80 months)
  • LiHAS (for 80 months)
  • Catalyst IT Ltd (for 75 months)
  • Supagro (for 70 months)
  • Demarcq SAS (for 69 months)
  • Universit Grenoble Alpes (for 55 months)
  • TouchWeb SAS (for 47 months)
  • SPiN AG (for 44 months)
  • CoreFiling (for 39 months)
  • Institut des sciences cognitives Marc Jeannerod (for 34 months)
  • Observatoire des Sciences de l Univers de Grenoble (for 31 months)
  • Tem Innovations GmbH (for 25 months)
  • WordFinder.pro (for 25 months)
  • CNRS DT INSU R sif (for 24 months)
  • Alter Way (for 17 months)
  • Institut Camille Jordan (for 6 months)

I have just got a PineTime smart watch [1] from Pine64. They cost $US27 each which ended up as $144.63 Australian for three including postage when I ordered on the 16th of September, it s annoying that you can t order more than 3 at a time to reduce postage costs. The Australian online store Kogan has smart watches starting at about $15 [2] with Bluetooth and support for phone notifications so the $48.21 for a PineTime doesn t compare well on just price and features. The watches Kogan sells start getting into high resolution at around the $25 price and many of them have features like 24*7 heart monitoring that the PineTime lacks (it just measures when you request it). No-one would order a PineTime for being cheap or having lots of features, you order it because you want open hardware that allows you to do things your way. Also the PineTime isn t going to be orphaned while it s likely that in a few years most of the cheap watches sold by Kogan etc won t support the new phones running the latest version of Android. The screen of the PineTime is 240*240 resolution (about 260dpi) with 64k colors. The screen resolution is lower than some high-end smart watches but higher than most phones and almost all monitors. I doubt that much benefit could be gained from higher resolution. Even on minimum brightness the screen is easy to read on all but the brightest sunny days. The compute capabilities are 4.5MB of flash storage, 64k of RAM, and a 64MHz CPU this can t run Linux and nothing like it will run Linux for a long time. I ve had the PineTime for 6 days now, I charged it once and it s now at 55% battery. It looks like it will last close to 2 weeks on a single charge and it s claimed that a newer firmware will make the battery last longer. Software The main Android app for using with the PineTime is GadgetBridge which I installed from the f-droid repository. It had lots of click-through menus for allowing access to various Android features (contacts, bluetooth, draw over foreground, location, and more) but after that it was easy to setup. It was the first bluetooth device I ve used which had a 6 digit PIN for connecting to a phone. Initially I used the PineTime with my Huawei Nova 7i [3]. The aim is to eventually have it run from my PinePhonePro but my test of the PinePhonePro didn t go as well as hoped [4]. Now I m using it on my Huawei Mate 10 Pro. It comes with InfiniTime [5] installed as the default firmware, mine had 1.11.0 which is a fairly recent version. I will probably upgrade it soon to get the better power optimisation and weather alerts in the watch face. I don t have any plans to use different watch firmware and I don t have any plans to contribute to firmware development I just can t hack on every FOSS project around it s better to do big contributions to a small number of projects. For people who don t want the default firmware the Wasp-OS project seems interesting as it s written in Python [6], I don t like Python but it s very popular. Python is particularly popular in ML development, it will be interesting to see if Wasp-OS becomes a preferred platform for smart watches that talk to GPT servers. Generally the software works well, one annoyance is that when a notification goes away on the phone it remains on the PineTime and has to be manually dismissed. It would be nice if clearing notifications on the phone would clear them on the PineTime too. The music control works with RocketPlayer on Android, it displays the track name and has options for pause/play and skipping forward and backward one track. Annoyingly the current firmware doesn t allow configuring the main screens, from the primary screen you swipe down for notifications, right for settings, up for menus, and there s nothing defined for swipe left. I d like to make swipe left the command to get to music control. Hardware It has a detachable band that appears to be within the common range of watch bands. According to the PineTime Wiki page [7] there are a selection of alternate bands that will fit it, but some don t because the band is recessed into the watch. It is IP67 rated which means you can probably wear it while swimming. The charging contacts are exposed on the bottom of the case which means that any chemicals left by pool water can be cleaned off and also as they are apparently not expected to be harmed by sweat and skin oil there shouldn t be a problem charging it. I have significant experience using a Samsung Galaxy S5 Mini which is rated at IP67 in swimming pools. I had two problems with the S5 Mini when getting out of the pool, firstly water in the headphone socket made the phone consider that it was in headphone mode and turn off the speakers and secondly it took hours to become dry enough to charge and after many swims the charge rate dropped presumably due to oxide on the contacts. There are reports of success when swimming with a PineTime. Generally it feels well made and appears more solid than the cheapest Kogan devices appear to be. Conclusion If I wanted monitoring for medical reasons then I would choose a different smart watch. I ve read about people doing things like tracking their body stats 24*7 and trying to discover useful things, the PineTime is not a good option for BioHacking type use. However if I did have a need for such things I d probably just buy a second smart watch and have one on each wrist. The PineTime generally works well. It s a pity it has fewer hardware features than closed devices that are cheaper. But having a firmware that can be continually improved by the community is good. The continually expanding use of mobile phone technology devices for custom use in corporations (such as mobile phone in custom case for scanning prices etc in a supermarket) has some potential for use with this. I can imagine someone adding some custom features to a PineTime for such use. When a supermarket chain has 200,000 employees (as Woolworths in Australia does) then paying for a few months of software development work to make a smart watch do specific things for that company could provide significant value. There are probably some business opportunities for FOSS developers to hack on extra hardware on a PineTime and write software to support it. I recommend that everyone who s into FOSS buy one of these. Preferably make a deal with two friends to get the minimum postage cost.

• [1] https://pine64.com/product-category/pinetime-smartwatch/
• [2] https://www.kogan.com/au/shop/category/smart-watches/
• [3] https://etbe.coker.com.au/2022/04/20/android-without-play/
• [4] https://etbe.coker.com.au/2023/10/11/pinephone-status/
• [5] https://wiki.pine64.org/wiki/InfiniTime
• [6] https://wasp-os.readthedocs.io/en/latest/
• [7] https://wiki.pine64.org/wiki/PineTime

Now this was quite a tease! For those who haven't seen it, I encourage you to check it out, it has a nice photo of a Debian t-shirt I did not know about, to quote the Fine Article:

Today, when going through a box of old T-shirts, I found the shirt I was looking for to bring to the occasion: [...] For the benefit of people who read this using a non-image-displaying browser or RSS client, they are respectively:

   10 years
  100 countries
 1000 maintainers
10000 packages

and

        1 project
       10 architectures
      100 countries
     1000 maintainers
    10000 packages
   100000 bugs fixed
  1000000 installations
 10000000 users
100000000 lines of code

20 years ago we celebrated eating grilled meat at J0rd1 s house. This year, we had vegan tostadas in the menu. And maybe we are no longer that young, but we are still very proud and happy of our project! Now How would numbers line up today for Debian, 20 years later? Have we managed to get the bugs fixed line increase by a factor of 10? Quite probably, the lines of code we also have, and I can only guess the number of users and installations, which was already just a wild guess back then, might have multiplied by over 10, at least if we count indirect users and installs as well

Now I don't know about you, but I really expected someone to come up with an answer to this, directly on Debian Planet! I have patiently waited for such an answer but enough is enough, I'm a Debian member, surely I can cull all of this together. So, low and behold, here are the actual numbers from 2023!

• 1 project: unchanged, although we could count 129 derivatives in the current census
• ~10 architectures: number almost unchanged, but the actual architectures are of course different (woody released with i386, m68k, Alpha, SPARC, PowerPC, ARM, IA-64, hppa, mips, s390; while bookworm released with actually 9 supported architectures instead of 10: i386, amd64, aarch64, armel, armhf, mipsel, mips64el, ppc64el, s390x)
• ~100 countries: actually 63 now, but I suspect we were generously rounding up last time as well (extracted with ldapsearch -b ou=users,dc=debian,dc=org -D uid=anarcat,ou=users,dc=debian,dc=org -ZZ -vLxW '(c=*)' c grep ^c: sort uniq -c sort -n wc -l on coccia)
• ~1000 maintainers: amazingly, almost unchanged (according to the last DPL vote, there were 831 DDs in 2003 and 996 in the last vote)
• 35000 packages: that number obviously increased quite a bit, but according to sources.debian.org, woody released with 5580 source packages and bookworm with 34782 source packages and according to UDD, there are actually 200k+ binary packages ( SELECT COUNT(DISTINCT package) FROM all_packages; => 211151)
• 1 000 000+ (OVER ONE MILLION!) bugs fixed! now that number grew by a whole order of magnitude, incredibly (934809 done, 16 fixed, 7595 forwarded, 82492 pending, 938 pending-fixed, according to UDD again, SELECT COUNT(id),status FROM all_bugs GROUP BY status;)
• ~1 000 000 installations (?): that one is hard to call. popcon has 225419 recorded installs, but it is likely an underestimate - hard to count
• how many users? even harder, we were claiming ten million users then, how many now? how can we even begin to tell, with Debian running on the space station?
• 1 000 000 000+ (OVER ONE BILLION!) lines of code: that, interestingly, has also grown by an order of magnitude, from 100M to 1B lines of code, again according to sources.debian.org, woody shipped with 143M lines of codes and bookworm with 1.3 billion lines of code

So it doesn't line up as nicely, but it looks something like this:

         1 project
        10 architectures
        30 years
       100 countries (actually 63, but we'd like to have yours!)
      1000 maintainers (yep, still there!)
     35000 packages
    211000 *binary* packages
   1000000 bugs fixed
1000000000 lines of code
 uncounted installations and users, we don't track you

So maybe the the more accurate, rounding to the nearest logarithm, would look something like:

         1 project
        10 architectures
       100 countries (actually 63, but we'd like to have yours!)
      1000 maintainers (yep, still there!)
    100000 packages
   1000000 bugs fixed
1000000000 lines of code
 uncounted installations and users, we don't track you

I really like how the "packages" and "bugs fixed" still have an order of magnitude between them there, but that the "bugs fixed" vs "lines of code" have an extra order of magnitude, that is we have fixed ten times less bugs per line of code since we last did this count, 20 years ago. Also, I am tempted to put 100 years in there, but that would be rounding up too much. Let's give it another 30 years first. Hopefully, some real scientist is going to balk at this crude methodology and come up with some more interesting numbers for the next t-shirt. Otherwise I'm available for bar mitzvahs and children parties.

The still very new package RcppInt64 (announced a week ago in this post) arrived on CRAN earlier today in its first update, now at 0.0.2. RcppInt64 collects some of the previous conversions between 64-bit integer values in R and C++, and regroups them in a single package by providing a single header. It offers two interfaces: both a more standard as<>() converter from R values along with its companions wrap() to return to R, as well as more dedicated functions from and to . The package by now has its first user as we rearranged RcppFarmHash to use it. The change today makes bit64 a weak rather than strong dependency as we use it only for tests and illustrations. We also added two missing fields to DESCRIPTION and added badges to README.md. The brief NEWS entry follows:

Changes in version 0.0.2 (2023-09-12)

• DESCRIPTION has been extended, badges have been added to README.md
• Package bit64 is now a Suggests:

Courtesy of my CRANberries, there is a [diffstat report relative to previous release][this release]. If you like this or other open-source work I do, you can sponsor me at GitHub.

This post by Dirk Eddelbuettel originated on his Thinking inside the box blog. Please report excessive re-aggregation in third-party for-profit settings.

Like each month, have a look at the work funded by Freexian s Debian LTS offering.

Debian LTS contributors In August, 19 contributors have been paid to work on Debian LTS, their reports are available:

• Abhijith PA did 0.0h (out of 12.0h assigned and 2.0h from previous period), thus carrying over 14.0h to the next month.
• Adrian Bunk did 18.5h (out of 18.5h assigned).
• Anton Gladky did 7.5h (out of 5.0h assigned and 10.0h from previous period), thus carrying over 7.5h to the next month.
• Bastien Roucari s did 17.0h (out of 15.5h assigned and 3.0h from previous period), thus carrying over 1.5h to the next month.
• Ben Hutchings did 18.5h (out of 9.0h assigned and 9.5h from previous period).
• Chris Lamb did 18.0h (out of 18.0h assigned).
• Emilio Pozuelo Monfort did 18.5h (out of 18.25h assigned and 0.25h from previous period).
• Guilhem Moulin did 24.0h (out of 22.5h assigned and 1.5h from previous period).
• Jochen Sprickerhof did 2.5h (out of 8.5h assigned and 10.0h from previous period), thus carrying over 16.0h to the next month.
• Lee Garrett did 18.0h (out of 9.25h assigned and 9.25h from previous period), thus carrying over 0.5h to the next month.
• Markus Koschany did 28.5h (out of 28.5h assigned).
• Ola Lundqvist did 0.0h (out of 0h assigned and 24.0h from previous period), thus carrying over 24.0h to the next month.
• Roberto C. S nchez did 18.5h (out of 13.0h assigned and 5.5h from previous period).
• Santiago Ruano Rinc n did 18.5h (out of 18.25h assigned and 0.25h from previous period).
• Sean Whitton did 7.0h (out of 10.0h assigned), thus carrying over 3.0h to the next month.
• Sylvain Beucler did 18.5h (out of 9.75h assigned and 8.75h from previous period).
• Thorsten Alteholz did 14.0h (out of 14.0h assigned).
• Tobias Frost did 16.0h (out of 16.0h assigned).
• Utkarsh Gupta did 12.25h (out of 0h assigned and 12.25h from previous period).

Evolution of the situation In August, we have released 42 DLAs. The month of August turned out to be a rather quiet month for the LTS team. Three notable updates were to bouncycastle, openssl, and zabbix. In the case of bouncycastle a flaw allowed for the possibility of LDAP injection and the openssl update corrected a resource exhaustion bug that could result in a denial of service. Zabbix, while not widely used, was the subject of several vulnerabilities which while not individually severe did combine to result in the zabbix update being of particular note. Apart from those, the LTS team continued the always ongoing work of triaging, investigating, and fixing vulnerabilities, as well as making contributions to the broader Debian and Free Software communities.

Thanks to our sponsors Sponsors that joined recently are in bold.

• Platinum sponsors:
  • TOSHIBA (for 96 months)
  • Civil Infrastructure Platform (CIP) (for 64 months)
• Gold sponsors:
  • Roche Diagnostics International AG (for 107 months)
  • Linode (for 101 months)
  • Babiel GmbH (for 90 months)
  • Plat Home (for 90 months)
  • University of Oxford (for 46 months)
  • Deveryware (for 33 months)
  • VyOS Inc (for 28 months)
  • EDF SA (for 17 months)
• Silver sponsors:
  • Domeneshop AS (for 111 months)
  • Nantes M tropole (for 105 months)
  • Univention GmbH (for 97 months)
  • Universit Jean Monnet de St Etienne (for 97 months)
  • Ribbon Communications, Inc. (for 91 months)
  • Exonet B.V. (for 81 months)
  • Leibniz Rechenzentrum (for 75 months)
  • CINECA (for 64 months)
  • Minist re de l Europe et des Affaires trang res (for 58 months)
  • Cloudways Ltd (for 48 months)
  • Dinahosting SL (for 46 months)
  • Bauer Xcel Media Deutschland KG (for 40 months)
  • Platform.sh (for 40 months)
  • Moxa Inc. (for 34 months)
  • sipgate GmbH (for 31 months)
  • OVH US LLC (for 29 months)
  • Tilburg University (for 29 months)
  • GSI Helmholtzzentrum f r Schwerionenforschung GmbH (for 20 months)
  • Soliton Systems K.K. (for 18 months)
• Bronze sponsors:
  • Evolix (for 112 months)
  • Seznam.cz, a.s. (for 112 months)
  • Linuxhotel GmbH (for 109 months)
  • Intevation GmbH (for 108 months)
  • Daevel SARL (for 107 months)
  • Bitfolk LTD (for 106 months)
  • Megaspace Internet Services GmbH (for 106 months)
  • Greenbone AG (for 105 months)
  • NUMLOG (for 105 months)
  • WinGo AG (for 105 months)
  • Ecole Centrale de Nantes - LHEEA (for 101 months)
  • Entr ouvert (for 96 months)
  • Adfinis AG (for 93 months)
  • GNI MEDIA (for 88 months)
  • Laboratoire LEGI - UMR 5519 / CNRS (for 88 months)
  • Tesorion (for 88 months)
  • Bearstech (for 79 months)
  • LiHAS (for 79 months)
  • Catalyst IT Ltd (for 74 months)
  • Supagro (for 69 months)
  • Demarcq SAS (for 68 months)
  • Universit Grenoble Alpes (for 54 months)
  • TouchWeb SAS (for 46 months)
  • SPiN AG (for 43 months)
  • CoreFiling (for 38 months)
  • Institut des sciences cognitives Marc Jeannerod (for 33 months)
  • Observatoire des Sciences de l Univers de Grenoble (for 30 months)
  • Tem Innovations GmbH (for 24 months)
  • WordFinder.pro (for 24 months)
  • CNRS DT INSU R sif (for 23 months)
  • Alter Way (for 16 months)
  • Institut Camille Jordan (for 5 months)

A minor maintenance release of the RcppFarmHash package is now on CRAN as version 0.0.3. RcppFarmHash wraps the Google FarmHash family of hash functions (written by Geoff Pike and contributors) that are used for example by Google BigQuery for the FARM_FINGERPRINT digest. This releases farms out the conversion to the integer64 add-on type in R to the new package RcppInt64 released a few days ago and adds some minor maintenance on continuous integration and alike. The brief NEWS entry follows:

Changes in version 0.0.3 (2023-09-09)

• Rely on new RcppInt64 package and its header for conversion
• Minor updates to continuous integration and README.md

If you like this or other open-source work I do, you can sponsor me at GitHub.

This post by Dirk Eddelbuettel originated on his Thinking inside the box blog. Please report excessive re-aggregation in third-party for-profit settings.

Welcome to the August 2023 report from the Reproducible Builds project! In these reports we outline the most important things that we have been up to over the past month. As a quick recap, whilst anyone may inspect the source code of free software for malicious flaws, almost all software is distributed to end users as pre-compiled binaries. The motivation behind the reproducible builds effort is to ensure no flaws have been introduced during this compilation process by promising identical results are always generated from a given source, thus allowing multiple third-parties to come to a consensus on whether a build was compromised. If you are interested in contributing to the project, please visit our Contribute page on our website.

Rust serialisation library moving to precompiled binaries Bleeping Computer reported that Serde, a popular Rust serialization framework, had decided to ship its serde_derive macro as a precompiled binary. As Ax Sharma writes:

The move has generated a fair amount of push back among developers who worry about its future legal and technical implications, along with a potential for supply chain attacks, should the maintainer account publishing these binaries be compromised.

After intensive discussions, use of the precompiled binary was phased out.

Reproducible builds, the first ten years On August 4th, Holger Levsen gave a talk at BornHack 2023 on the Danish island of Funen titled Reproducible Builds, the first ten years which promised to contain:

[ ] an overview about reproducible builds, the past, the presence and the future. How it started with a small [meeting] at DebConf13 (and before), how it grew from being a Debian effort to something many projects work on together, until in 2021 it was mentioned in an executive order of the president of the United States. (HTML slides)

Holger repeated the talk later in the month at Chaos Communication Camp 2023 in Zehdenick, Germany: A video of the talk is available online, as are the HTML slides.

Reproducible Builds Summit Just another reminder that our upcoming Reproducible Builds Summit is set to take place from October 31st November 2nd 2023 in Hamburg, Germany. Our summits are a unique gathering that brings together attendees from diverse projects, united by a shared vision of advancing the Reproducible Builds effort. During this enriching event, participants will have the opportunity to engage in discussions, establish connections and exchange ideas to drive progress in this vital field. If you re interested in joining us this year, please make sure to read the event page, the news item, or the invitation email that Mattia Rizzolo sent out, which have more details about the event and location. We are also still looking for sponsors to support the event, so do reach out to the organizing team if you are able to help. (Also of note that PackagingCon 2023 is taking place in Berlin just before our summit, and their schedule has just been published.)

Vagrant Cascadian on the Sustain podcast Vagrant Cascadian was interviewed on the SustainOSS podcast on reproducible builds:

Vagrant walks us through his role in the project where the aim is to ensure identical results in software builds across various machines and times, enhancing software security and creating a seamless developer experience. Discover how this mission, supported by the Software Freedom Conservancy and a broad community, is changing the face of Linux distros, Arch Linux, openSUSE, and F-Droid. They also explore the challenges of managing random elements in software, and Vagrant s vision to make reproducible builds a standard best practice that will ideally become automatic for users. Vagrant shares his work in progress and their commitment to the last mile problem.

The episode is available to listen (or download) from the Sustain podcast website. As it happens, the episode was recorded at FOSSY 2023, and the video of Vagrant s talk from this conference (Breaking the Chains of Trusting Trust is now available on Archive.org: It was also announced that Vagrant Cascadian will be presenting at the Open Source Firmware Conference in October on the topic of Reproducible Builds All The Way Down.

On our mailing list Carles Pina i Estany wrote to our mailing list during August with an interesting question concerning the practical steps to reproduce the hello-traditional package from Debian. The entire thread can be viewed from the archive page, as can Vagrant Cascadian s reply.

Website updates Rahul Bajaj updated our website to add a series of environment variations related to reproducible builds [ ], Russ Cox added the Go programming language to our projects page [ ] and Vagrant Cascadian fixed a number of broken links and typos around the website [ ][ ][ ].

Software development In diffoscope development this month, versions 247, 248 and 249 were uploaded to Debian unstable by Chris Lamb, who also added documentation for the new specialize_as method and expanding the documentation of the existing specialize as well [ ]. In addition, Fay Stegerman added specialize_as and used it to optimise .smali comparisons when decompiling Android .apk files [ ], Felix Yan and Mattia Rizzolo corrected some typos in code comments [ , ], Greg Chabala merged the RUN commands into single layer in the package s Dockerfile [ ] thus greatly reducing the final image size. Lastly, Roland Clobus updated tool descriptions to mark that the xb-tool has moved package within Debian [ ].
reprotest is our tool for building the same source code twice in different environments and then checking the binaries produced by each build for any differences. This month, Vagrant Cascadian updated the packaging to be compatible with Tox version 4. This was originally filed as Debian bug #1042918 and Holger Levsen uploaded this to change to Debian unstable as version 0.7.26 [ ].

Distribution work In Debian, 28 reviews of Debian packages were added, 14 were updated and 13 were removed this month adding to our knowledge about identified issues. A number of issue types were added, including Chris Lamb adding a new timestamp_in_documentation_using_sphinx_zzzeeksphinx_theme toolchain issue.
In August, F-Droid added 25 new reproducible apps and saw 2 existing apps switch to reproducible builds, making 191 apps in total that are published with Reproducible Builds and using the upstream developer s signature. [ ]
Bernhard M. Wiedemann published another monthly report about reproducibility within openSUSE.

Upstream patches The Reproducible Builds project detects, dissects and attempts to fix as many currently-unreproducible packages as possible. We endeavour to send all of our patches upstream where appropriate. This month, we wrote a large number of such patches, including:

• Bernhard M. Wiedemann:
  • arimo (modification time in build results)
  • apptainer (random Go build identifier)
  • arrow (fails to build on single-CPU machines)
  • camlp (parallelism-related issue)
  • developer (Go ordering-related issue)
  • elementary-xfce-icon-theme (font-related problem)
  • gegl (parallelism issue)
  • grommunio (filesystem ordering issue)
  • grpc (drop nondetermistic log)
  • guile-parted (parallelism-related issue)
  • icinga (hostname-based issue)
  • liquid-dsp (CPU-oriented problem)
  • memcached (package fails to build far in the future)
  • openmpi5/openpmix (date/copyright year issue)
  • openmpi5 (date/copyright year issue)
  • orthanc-ohif+orthanc-volview (ordering related issue plus timestamp in a Gzip)
  • perl-Net-DNS (package fails to build far in the future)
  • postgis (parallelism issue)
  • python-scipy (uses an arbitrary build path)
  • python-trustme (package fails to build far in the future)
  • qtbase/qmake/goldendict-ng (timestamp-related issue)
  • qtox (date-related issue)
  • ring (filesytem ordering related issue)
  • scipy (1 & 2) (drop arbtirary build path and filesytem-ordering issue)
  • snimpy (1 & 3) (fails to build on single-CPU machines as well far in the future)
  • tango-icon-theme (font-related issue)
• Chris Lamb:
  • #1042954 filed against libcerf.
  • #1042955 filed against zzzeeksphinx.
  • #1043330 filed against tox.
  • #1050357 filed against pytds.
  • #1050727 filed against zlib.
  • #1050944 filed against jtreg6.
  • #1050955 filed against rpy2.
• Rebecca N. Palmer:
  • #1050619 filed against nbclient.

Testing framework The Reproducible Builds project operates a comprehensive testing framework (available at tests.reproducible-builds.org) in order to check packages and other artifacts for reproducibility. In August, a number of changes were made by Holger Levsen:

• Debian-related changes:
  • Disable Debian live image creation jobs until an OpenQA credential problem has been fixed. [ ]
  • Run our maintenance scripts every 3 hours instead of every 2. [ ]
  • Export data for unstable to the reproducible-tracker.json data file. [ ]
  • Stop varying the build path, we want reproducible builds. [ ]
  • Temporarily stop updating the pbuilder.tgz for Debian unstable due to #1050784. [ ][ ]
  • Correctly document that we are not variying usrmerge. [ ][ ]
  • Mark two armhf nodes (wbq0 and jtx1a) as down; investigation is needed. [ ]
• Misc:
  • Force reconfiguration of all Jenkins jobs, due to the recent rise of zombie processes. [ ]
  • In the node health checks, also try to restart failed ntpsec, postfix and vnstat services. [ ][ ][ ]
• System health checks:
  • Detect Debian live build failures due to missing credentials. [ ][ ]
  • Ignore specific types of known zombie processes. [ ][ ]

In addition, Vagrant Cascadian updated the scripts to use a predictable build path that is consistent with the one used on buildd.debian.org. [ ][ ]

---

If you are interested in contributing to the Reproducible Builds project, please visit our Contribute page on our website. However, you can get in touch with us via:

• IRC: #reproducible-builds on irc.oftc.net.
• Mailing list: rb-general@lists.reproducible-builds.org
• Mastodon: @reproducible_builds@fosstodon.org
• Twitter: @ReproBuilds

Focus This month I didn't have any particular focus. I just worked on issues in my info bubble.

Changes

• libpst: cleanups
• duck: 01.org is obsolete
• lintian: 01.org is obsolete
• reportbug: usertags pseudo-headers are now repeatable
• Debian BTS usertags: added porter usertags, fixed glibc/DSA/pcre/porter usertags
• Debian package uploads: git-imerge (1 2)
• Debian wiki pages: BisectDebian, DebianKernel/UserspaceTools, DebianMaintainer, DebianTesting, PortsDocs/New (1 2), PortTemplate, PressCoverage
• FOSSjobs wiki pages: Resources (1 2)

Debugging

• Investigated test failures after Debian pybuild distutils update

Issues

• Crashes in fdupes
• Missing dep in gnome-calculator
• Warnings in dbus-broker
• Incorrect unsigned mail handling in evolution
• Features in needrestart, evolution
• Deprecated interface use in git-imerge
• Broken symlink in libgnutls28-dev
• Obsolete URL in thermald
• Conffile removal in bluez, iio-sensor-proxy

Review

• Debian BTS usertags: changes for the month

Administration

• Debian IRC: rescue an alternate channel and make it harder to join accidentally
• Debian wiki: unblock IP addresses, approve accounts, update emails for accounts

Communication

• Respond to queries from Debian users and contributors on the mailing lists and IRC

Sponsors The libpst work was sponsored. All other work was done on a volunteer basis.

Now that it's more convenient for me to run containers at home, I thought I'd write a bit about web apps I am enjoying. First up, FreshRSS, a web feed aggregator. I used to make heavy use of Google Reader until Google killed it, and although a bunch of self-hosted cloned sprung up very quickly afterwards, I didn't transition to any of them. Then followed a number of years within which, in retrospect, I basically didn't do a great job of organising reading the web. This lasted until a couple of years ago when, on a whim, I tried out NetNewsWire for iOS. NetNewsWire is a well-established and much-loved feed reader for Mac which I've never used. I used the iOS version in isolation for a long time: only dipping into web feeds on my phone and never on another device. I'd like to see the old web back, and do my part to make that happen. I've continually published rss and atom feeds for my own blog. I'm also trying to blog more: this might be easier now that Twitter (which, IMHO, took a lot of the energy for quick writing out of blogging) is mortally wounded. So, I'm giving FreshRSS a go. Early signs are good: it's fast, lightweight, easy to use, vaguely resembles how I remember Google Reader, and has a native dark-mode. It's still early days building up a new list of feeds to follow. I'll be sure to share interesting ones as I discover them!

Like each month, have a look at the work funded by Freexian s Debian LTS offering.

Debian LTS contributors In July, 18 contributors have been paid to work on Debian LTS, their reports are available:

• Abhijith PA did 0.0h (out of 0h assigned and 2.0h from previous period), thus carrying over 2.0h to the next month.
• Adrian Bunk did 24.75h (out of 18.25h assigned and 6.5h from previous period).
• Anton Gladky did 5.0h (out of 5.0h assigned and 10.0h from previous period), thus carrying over 10.0h to the next month.
• Bastien Roucari s did 17.0h (out of 17.0h assigned and 3.0h from previous period), thus carrying over 3.0h to the next month.
• Ben Hutchings did 14.0h (out of 24.0h assigned), thus carrying over 9.5h to the next month.
• Chris Lamb did 18.0h (out of 18.0h assigned).
• Emilio Pozuelo Monfort did 24.0h (out of 24.75h assigned), thus carrying over 0.25h to the next month.
• Guilhem Moulin did 23.25h (out of 24.75h assigned), thus carrying over 1.5h to the next month.
• Jochen Sprickerhof did 10.0h (out of 20.0h assigned), thus carrying over 10.0h to the next month.
• Lee Garrett did 16.0h (out of 9.75h assigned and 15.5h from previous period), thus carrying over 9.25h to the next month.
• Markus Koschany did 24.75h (out of 24.75h assigned).
• Ola Lundqvist did 0.0h (out of 13.0h assigned and 11.0h from previous period), thus carrying over 24.0h to the next month.
• Roberto C. S nchez did 19.25h (out of 14.75h assigned and 10.0h from previous period), thus carrying over 5.5h to the next month.
• Santiago Ruano Rinc n did 25.5h (out of 10.5h assigned and 15.25h from previous period), thus carrying over 0.25h to the next month.
• Sylvain Beucler did 16.0h (out of 21.25h assigned and 3.5h from previous period), thus carrying over 8.75h to the next month.
• Thorsten Alteholz did 14.0h (out of 14.0h assigned).
• Tobias Frost did 16.0h (out of 16.0h assigned).
• Utkarsh Gupta did 1.5h (out of 0h assigned and 13.75h from previous period), thus carrying over 12.25h to the next month.

Evolution of the situation In July, we have released 35 DLAs. LTS contributor Lee Garrett, has continued his hard work to prepare a testing framework for Samba, that can now provision bootable VMs with little effort, both for Debian and for Windows. This work included the introduction of a new package to Debian, rhsrvany, which allows turning any Windows program or script into a Windows service. As the Samba testing framework matures it will be possible to perform functional tests which cannot be performed with other available test mechanisms and aspects of this framework will be generalizable to other package ecosystems beyond Samba. July included a notable security update of bind9 by LTS contributor Chris Lamb. This update addressed a potential denial of service attack in this critical network infrastructure component.

Thanks to our sponsors Sponsors that joined recently are in bold.

• Platinum sponsors:
  • TOSHIBA (for 95 months)
  • Civil Infrastructure Platform (CIP) (for 63 months)
• Gold sponsors:
  • Roche Diagnostics International AG (for 106 months)
  • Linode (for 100 months)
  • Babiel GmbH (for 89 months)
  • Plat Home (for 89 months)
  • University of Oxford (for 45 months)
  • Deveryware (for 32 months)
  • VyOS Inc (for 27 months)
  • EDF SA (for 16 months)
• Silver sponsors:
  • Domeneshop AS (for 110 months)
  • Nantes M tropole (for 104 months)
  • Univention GmbH (for 96 months)
  • Universit Jean Monnet de St Etienne (for 96 months)
  • Ribbon Communications, Inc. (for 90 months)
  • Exonet B.V. (for 80 months)
  • Leibniz Rechenzentrum (for 74 months)
  • CINECA (for 63 months)
  • Minist re de l Europe et des Affaires trang res (for 57 months)
  • Cloudways Ltd (for 47 months)
  • Dinahosting SL (for 45 months)
  • Bauer Xcel Media Deutschland KG (for 39 months)
  • Platform.sh (for 39 months)
  • Moxa Inc. (for 33 months)
  • sipgate GmbH (for 30 months)
  • OVH US LLC (for 28 months)
  • Tilburg University (for 28 months)
  • GSI Helmholtzzentrum f r Schwerionenforschung GmbH (for 20 months)
  • Soliton Systems K.K. (for 17 months)
• Bronze sponsors:
  • Evolix (for 111 months)
  • Seznam.cz, a.s. (for 111 months)
  • Intevation GmbH (for 108 months)
  • Linuxhotel GmbH (for 108 months)
  • Daevel SARL (for 106 months)
  • Bitfolk LTD (for 105 months)
  • Megaspace Internet Services GmbH (for 105 months)
  • Greenbone AG (for 104 months)
  • NUMLOG (for 104 months)
  • WinGo AG (for 104 months)
  • Ecole Centrale de Nantes - LHEEA (for 100 months)
  • Entr ouvert (for 95 months)
  • Adfinis AG (for 92 months)
  • GNI MEDIA (for 87 months)
  • Laboratoire LEGI - UMR 5519 / CNRS (for 87 months)
  • Tesorion (for 87 months)
  • Bearstech (for 78 months)
  • LiHAS (for 78 months)
  • Catalyst IT Ltd (for 73 months)
  • Supagro (for 68 months)
  • Demarcq SAS (for 67 months)
  • Universit Grenoble Alpes (for 53 months)
  • TouchWeb SAS (for 45 months)
  • SPiN AG (for 42 months)
  • CoreFiling (for 37 months)
  • Institut des sciences cognitives Marc Jeannerod (for 32 months)
  • Observatoire des Sciences de l Univers de Grenoble (for 29 months)
  • Tem Innovations GmbH (for 24 months)
  • WordFinder.pro (for 23 months)
  • CNRS DT INSU R sif (for 22 months)
  • Alter Way (for 15 months)
  • Institut Camille Jordan (for 4 months)

This is a short announcement to say that I have changed my main OpenPGP key. A signed statement is available with the cryptographic details but, in short, the reason is that I stopped using my old YubiKey NEO that I have worn on my keyring since 2015. I now have a YubiKey 5 which supports ED25519 which features much shorter keys and faster decryption. It allowed me to move all my secret subkeys on the key (including encryption keys) while retaining reasonable performance. I have written extensive documentation on how to do that OpenPGP key rotation and also YubiKey OpenPGP operations.

Warning on storing encryption keys on a YubiKey People wishing to move their private encryption keys to such a security token should be very careful as there are special precautions to take for disaster recovery. I am toying with the idea of writing an article specifically about disaster recovery for secrets and backups, dealing specifically with cases of death or disabilities.

Autocrypt changes One nice change is the impact on Autocrypt headers, which are considerably shorter. Before, the header didn't even fit on a single line in an email, it overflowed to five lines:

Autocrypt: addr=anarcat@torproject.org; prefer-encrypt=nopreference;
 keydata=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

After the change, the entire key fits on a single line, neat!

Autocrypt: addr=anarcat@torproject.org; prefer-encrypt=nopreference;
 keydata=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

Note that I have implemented my own kind of ridiculous Autocrypt support for the Notmuch Emacs email client I use, see this elisp code. To import keys, I pipe the message into this script which is basically just:

sq autocrypt decode   gpg --import

... thanks to Sequoia best-of-class Autocrypt support.

Note on OpenPGP usage While some have claimed OpenPGP's death, I believe those are overstated. Maybe it's just me, but I still use OpenPGP for my password management, to authenticate users and messages, and it's the interface to my YubiKey for authenticating with SSH servers. I understand people feel that OpenPGP is possibly insecure, counter-intuitive and full of problems, but I think most of those problems should instead be attributed to its current flagship implementation, GnuPG. I have tried to work with GnuPG for years, and it keeps surprising me with evilness and oddities. I have high hopes that the Sequoia project can bring some sanity into this space, and I also hope that RFC4880bis can eventually get somewhere so we have a more solid specification with more robust crypto. It's kind of a shame that this has dragged on for so long, but Update: there's a separate draft called openpgp-crypto-refresh that might actually be adopted as the "OpenPGP RFC" soon! And it doesn't keep real work from happening in Sequoia and other implementations. Thunderbird rewrote their OpenPGP implementation with RNP (which was, granted, a bumpy road because it lost compatibility with GnuPG) and Sequoia now has a certificate store with trust management (but still no secret storage), preliminary OpenPGP card support and even a basic GnuPG compatibility layer. I'm also curious to try out the OpenPGP CA capabilities. So maybe it's just because I'm becoming an old fart that doesn't want to change tools, but so far I haven't seen a good incentive in switching away from OpenPGP, and haven't found a good set of tools that completely replace it. Maybe OpenSSH's keys and CA can eventually replace it, but I suspect they will end up rebuilding most of OpenPGP anyway, just more slowly. If they do, let's hope they avoid the mistakes our community has done in the past at least...

Manipur Lot of news from Manipur. Seems the killings haven t stopped. In fact, there was a huge public rally in support of the rapists and murderers as reported by Imphal Free Press. The Ruling Govt. both at the Center and the State being BJP continuing to remain mum. Both the Internet shutdowns have been criticized and seems no effect on the Government. Their own MLA was attacked but they have chosen to also be silent about that. The opposition demanded that the PM come in both the houses and speak but he has chosen to remain silent. In that quite a few bills were passed without any discussions. If it was not for the viral videos nobody would have come to know of anything . Internet shutdowns impact women disproportionately as more videos of assaults show Of course, as shared before that gentleman has been arrested under Section 66A as I shared in the earlier blog post. In any case, in the last few years, this Government has chosen to pass most of its bills without any discussions. Some of the bills I will share below. The attitude of this Govt. can be seen through this cartoon

The above picture shows the disqualified M.P. Rahul Gandhi because he had asked what is the relationship between Adani and Modi. The other is the Mr. Modi, the Prime Minister who refuses to enter and address the Parliament. Prem Panicker shares how we chillingly have come to this stage when even after rapes we are silent

Data Leakage According to most BJP followers this is not a bug but a feature of this Government. Sucheta Dalal of Moneylife shared how the data leakage has been happening at the highest levels in the Government. The leakage is happening at the ministerial level because unless the minister or his subordinate passes a certain startup others cannot come to know. As shared in the article, while the official approval may take 3-4 days, within hours other entities start congratulating. That means they know that the person/s have been approved.While reading this story, the first thought that immediately crossed my mind was data theft and how easily that would have been done. There was a time when people would be shocked by articles such as above and demand action but sadly even if people know and want to do something they feel powerless to do anything

PAN Linking and Aadhar Last month GOI made PAN Linking to Aadhar a thing. This goes against the judgement given by the honored Supreme Court in September 2018. Around the same time, Moneylife had reported on the issue on how the info. on Aadhar cards is available and that has its consequences. But to date nothing has happened except GOI shrugging. In the last month, 13 crore+ users of PAN including me affected by it I had tried to actually delink the two but none of the banks co-operated in the same Aadhar has actually number of downsides, most people know about the AEPS fraud that has been committed time and time again. I have shared in previous blog posts the issue with biometric data as well as master biometric data that can and is being used for fraud. GOI either ignorant or doesn t give a fig as to what happens to you, citizen of India. I could go on and on but it would result in nothing constructive so will stop now

IRCv3 I had been enthused when I heard about IRCV3. While it was founded in 2016, it sorta came on in its own in around 2020. I did try matrix or rather riot-web and went through number of names while finally setting on element. While I do have the latest build 1.11.36 element just hasn t been workable for me. It is too outsized, and occupies much more real estate than other IM s (Instant Messengers and I cannot correct size it like I do say for qbittorrent or any other app. I had filed couple of bugs on it but because it apparently only affects me, nothing happened afterwards But that is not the whole story at all. Because of Debconf happening in India, and that too Kochi, I decided to try out other tools to see how IRC is doing. While the Debian wiki page shares a lot about IRC clients and is also helpful in sharing stats by popcounter ( popularity-contest, thanks to whoever did that), it did help me in trying two of the most popular clients. Pidgin and Hexchat, both of which have shared higher numbers. This might be simply due to the fact that both get downloaded when you install the desktop version or they might be popular in themselves, have no idea one way or the other. But still I wanted to see what sort of experience I could expect from both of them in 2023. One of the other things I noticed is that Pidgin is not a participating organization in ircv3 while hexchat is. Before venturing in, I also decided to take a look at oftc.net. Came to know that for sometime now, oftc has started using web verify. I didn t see much of a difference between hcaptcha and gcaptcha other than that the fact that they looked more like oil paintings rather than anything else. While I could easily figure the odd man out or odd men out to be more accurate, I wonder how a person with low or no vision would pass that ??? Also much of our world is pretty much contextual based, figuring who the odd one is or are could be tricky. I do not have answers to the above other than to say more work needs to be done by oftc in that area. I did get a link that I verified. But am getting ahead of the story. Another thing I understood that for some reason oftc is also not particpating in ircv3, have no clue why not :(I

Account Registration in Pidgin and Hexchat This is the biggest pain point in both. I failed to register via either Pidgin or Hexchat. I couldn t find a way in either client to register my handle. I have had on/off relationships with IRC over the years, the biggest issue being IIRC is that if you stop using your handle for a month or two others can use it. IIRC, every couple of months or so, irc/oftc releases the dormant ones. Matrix/Vector has done quite a lot in that regard but that s a different thing altogether so for the moment will keep that aside. So, how to register for the network. This is where webchat.oftc.net comes in. You get a quaint 1970 s IRC window (probably emulated) where you call Nickserv to help you. As can be seen it one of the half a dozen bots that helps IRC. So the first thing you need to do is /msg nickserv help what you are doing is asking nickserv what services they have and Nickserv shares the numbers of services it offers. After looking into, you are looking for register /msg nickerv register Both the commands tell you what you need to do as can be seen by this

Let s say you are XYZ and your e-mail address is xyz@xyz.com This is just a throwaway id I am taking for the purpose of showing how the process is done. For this, also assume your passowrd is 1234xyz;0x something like this. I have shared about APG (Advanced Password Generator) before so you could use that to generate all sorts of passwords for yourself. So next would be /msg nickserv register 1234xyz;0x xyz@xyz.com Now the thing to remember is you need to be sure that the email is valid and in your control as it would generate a link with hcaptcha. Interestingly, their accessibility signup fails or errors out. I just entered my email and it errors out. Anyway back to it. Even after completing the puzzle, even with the valid username and password neither pidgin or hexchat would let me in. Neither of the clients were helpful in figuring out what was going wrong. At this stage, I decided to see the specs of ircv3 if they would help out in anyway and came across this. One would have thought that this is one of the more urgent things that need to be fixed, but for reasons unknown it s still in draft mode. Maybe they (the participants) are not in consensus, no idea. Unfortunately, it seems that the participants of IRCv3 have chosen a sort of closed working model as the channel is restricted. The only notes of any consequence are being shared by Ilmari Lauhakangas from Finland. Apparently, Mr/Ms/they Ilmari is also a libreoffice hacker. It is possible that their is or has been lot of drama before or something and that s why things are the way they are. In either way, doesn t tell me when this will be fixed, if ever. For people who are on mobiles and whatnot, without element, it would be 10x times harder. Update :- Saw this discussion on github. Don t see a way out It seems I would be unable to unable to be part of Debconf Kochi 2023. Best of luck to all the participants and please share as much as possible of what happens during the event.

RISC -V Motherboard, SBC While I didn t want to, a part of me is hyped about this motherboard. This would probably be launched somewhere in November. There are obvious issues in this, the first being unlike regular motherboards you wouldn t be upgrade as you would do.You can t upgrade your memory, can t upgrade the CPU (although new versions of instructions could be uploaded, similar to BIOS updates) but as the hardware is integrated (the quad-core SiFive Performance P550 core complex) it would really depend. If the final pricing is around INR 4-5k then it may be able to sell handsomely provided there are people to push and provide support around it. A 500 GB or 1 TB SSD coupled with it and a cheap display unit and you could use it anywhere although as the name says it s more for tinkering as the name suggests. Another board that could perhaps be of more immediate use would be the beagleboard. They launched the same couple of days back and called it Beagle V-Ahead. Again, costs are going to be a concern. Just a year before the pandemic the Beagleboard Black (BB) used to cost in the sub 4k range, today it costs 8k+ for the end user, more than twice the price. How much Brexit is to be blamed for this and how much the Indian customs we would never know. The RS Group that is behind that shop is head-quartered in the UK. As said before, we do not know the price of either board as it probably will take few months for v-ahead to worm its way in the Indian market, maybe another 6 months or so. Even so, with the limited info. on both the boards, I am tilting more towards the other HiFive one. We should come to know about the boards say in 3-5 months of time.

CHIPS Act I had shared about the Chips Act a few times here as well as on SM. Two articles do tell how the CHIPS Act 2023 is more of a political tool, an industrial defence policy rather than just business as most people tend to think.

Cancelation of Books, Books Burning etc. Almost 2400 years ago, Plato released his work called Plato s Republic and one of the seminal works within it is perhaps one of the most famous works was the Allegory of the Cave. That is used again and again in a myriad ways, mostly in science-fiction though and mostly to do with utopian, dystopian movies, webseries etc. I did share how books are being canceled in the States, also a bit here. But the most damning thing has happened throughout history, huge quantities of books burned almost all for politics But part of it has been neglect as well as this time article shares. What we have lost and continue to lose is just priceless. Every book has a grain of truth in it, some more, some less but equally enjoyable. Most harmful is the neglect towards books and is more true today than any other time in history. Kids today have a wide variety of tools to keep themselves happy or occupied, from anime, VR, gaming the list goes on and on. In that scenario, how the humble books can compete. People think of Kindle but most e-readers like Kindle are nothing but obsolescence by design. I have tried out Kindle a few times but find it a bit on the flimsy side. Books are much better IMHO or call me old-school. While there are many advantages, one of the things that I like about books is that you can easily put yourself in either the protagonist or the antagonist or somewhere in the middle and think of the possible scenarios wherever you are in a particular book. I could go on but it will be a blog post or two in itself. Till later. Happy Reading.

Update:Manipur Extremely horrifying visuals, articles and statements continue to emanate from Manipur. Today, 19th July 2023, just couple of hours back, a video surfaced showing two Kuki women were shown as stripped, naked and Meitei men touching their private parts. Later on, we came to know that this was in response of a disinformation news spread by the Meitis of few women being raped although no documentary evidence of the same surfaced, no names nothing. While I don t want to share the video I will however share the statement shared by the Kuki-Zo tribal community on that. The print gives a bit more context to what has been going on.

Update, Few hours later : The Print also shared more of a context about six days ago. The reason we saw the video now was that for the last 2.5 months Manipur was in Internet shutdown so those videos got uploaded now. There was huge backlash from the Twitter community and GOI ordered the Manipur Police to issue this Press Release yesterday night or just few hours before with yesterday s time-stamp.

IndianExpress shared an article that does state that while an FIR had been registered immediately no arrests so far and this is when you can see the faces of all the accused. Not one of them tried to hide their face behind a mask or something. So, if the police wanted, they could have easily identified who they are. They know which community the accused belong to, they even know from where they came. If they wanted to, they could have easily used mobile data and triangulation to find the accused and their helpers. So, it does seem to be attempt to whitewash and protect a certain community while letting it prey on the other. Another news that did come in, is because of the furious reaction on Twitter, Youtube has constantly been taking down the video as some people are getting a sort of high more so from the majoritarian community and making lewd remarks. Twitter has been somewhat quick when people are making lewd remarks against the two girl/women. Quite a bit of the above seems like a cover-up. Lastly, apparently GOI has agreed to having a conversation about it in Lok Sabha but without any voting or passing any resolutions as of right now. Would update as an when things change. Update: Smriti Irani, the Child and Development Minister gave the weakest statement possible

As can be noticed, she said sexual assault rather than rape. The women were under police custody for safety when they were whisked away by the mob. No mention of that. She spoke to the Chief Minister who has been publicly known as one of the provocateurs or instigators for the whole thing. The CM had publicly called the Kukus and Nagas as foreigners although both of them claim to be residing for thousands of years and they apparently have documentary evidence of the same . Also not clear who is doing the condemning here. No word of support for the women, no offer of intervention, why is she the Minister of Child and Women Development (CDW) if she can t use harsh words or give support to the women who have gone and going through horrific things Update : CM Biren Singh s Statement after the video surfaced

This tweet is contradictory to the statements made by Mr. Singh couple of months ago. At that point in time, Mr. Singh had said that NIA, State Intelligence Departments etc. were giving him minute to minute report on the ground station. The Police itself has suo-moto (on its own) powers to investigate and apprehend criminals for any crime. In fact, the Police can call for questioning of anybody in any relation to any crime and question them for upto 48 hours before charging them. In fact, many cases have been lodged where innocent persons have been framed or they have served much more in the jail than the crime they are alleged to have been committed. For e.g. just a few days before there was a media report of a boy who has been in jail for 3 years. His alleged crime, stealing mere INR 200/- to feed himself. Court doesn t have time to listen to him yet. And there are millions like him. The quint eloquently shares the tale where it tells how both the State and the Centre have been explicitly complicit in the incidents ravaging Manipur. In fact, what has been shared in the article has been very true as far as greed for land is concerned. Just couple of weeks back there have been a ton of floods emanating from Uttarakhand and others. Just before the flooding began, what was the CM doing can be seen here. Apart from the newspapers I have shared and the online resources, most of the mainstream media has been silent on the above. In fact, they have been silent on the Manipur issue until the said video didn t come into limelight. Just now, in Lok Sabha everybody is present except the Prime Minister and the Home Minister. The PM did say that the law will take its own course, but that s about it. Again no support for the women concerned. Update: CJI (Chief Justice of India) has taken suo-moto cognizance and has warned both the State and Centre to move quickly otherwise they will take the matter in their own hand.

Update: Within 2 hours of the CJI taking suo-moto cognizance, they have arrested one of the main accused Heera Das

The above tells you why the ban on Internet was put in the first place. They wanted to cover it all up. Of all the celebs, only one could find a bit of spine, a bit of backbone to speak about it, all the rest mum

Just imagine, one of the women is around my age while the young one could have been a daughter if I had married on time or a younger sister for sure. If ever I came face to face with them, I just wouldn t be able to look them in the eye. Even their whole whataboutery is built on sham. From their view Kukis are from Burma or Burmese descent. All of which could be easily proved by DNA of all. But let s leave that for a sec. Let s take their own argument that they are Burmese. Their idea of Akhand Bharat stretches all the way to Burma (now called Myanmar). They want all the land but no idea with what to do with the citizens living on it. Even after the video, the whataboutery isn t stopping, that shows how much hatred is there. And not knowing that they too will be victim of the same venom one or the other day Update: Opposition was told there would be a debate on Manipur. The whole day went by, no debate. That s the shamelessness of this Govt. Update 20th July 19:25 Center may act or not act against the perpetrators but they will act against Twitter who showed the crime. Talk about shooting the messenger

We are now in the last stage. In 2014, we were at 6

• I uploaded sgt-puzzles to unstable. This brought in the new upstream version previously in experimental. I incorporated an updated German translation from Helge Kreutzmann, and made translation updates less tricky to do.
• I made some changes to the nfs-utils package:
  • Completed the transition from setting command-line options in /etc/default to /etc/nfs.conf.d.
  • Made its shell scripts shellcheck-clean and added shellcheck to CI. (Thanks to who sent a patch for the init scripts.)
  These were included in version 1:2.6.3-1.
• I accepted several MRs on Salsa:
  • linux/master: [armhf] drivers/staging/media/rkvdec: enable rkvdec as module
  • linux/master: Update to 6.4-rcX
  • linux/bookworm: udeb: add r8188eu to nic-wireless-modules (Closes: #1035824)
  • nfs-utils/master: Rely on the generator units for the rpc_pipefs mount
  • linux/master: mm: Enable Multi-Gen LRU implementation (by default)
  • linux/master: d/rules.real: Also remove executable bit from dtbo files
  • linux/master: [mips*]: Fixes for boston kernel
  • linux/sid: Ignore ABI changes for xfrm_bpf_md_dst (only for use in xfrm subsystem)
• I uploaded linux versions 6.4~rc6-1~exp1 and 6.4~rc7-1~exp1 to experimental.
• I updated the buster-security (4.19) branch of linux to stable version 4.19.288, but didn't upload it this month.
• I fixed build regressions for linux/experimental on several architectures, and sent the changes upstream where appropriate (hppa, m68k, and preemptively sparc).
• I created a bookworm-backports branch for the linux package, but that suite is not yet open to uploads.
• I uploaded linux version 6.1.27-1~bpo11+1 and firmware-nonfree version 20230210-5~bpo11+1 to bullseye-backports, but they still haven't been accepted.
• I fixed a build regression and many other bugs in dadhi-linux.
• I realised that the linux test-patches script still wasn't building all the packages needed to make the linux-headers package (or, on some architectures, the linux-image package) installable. I fixed this for unstable, backported those changes to bookworm, and backported all the test-patches changes to bullseye.
• I prepared a backport of firmware-nonfree version 20220913-1 to bullseye (not -backports). This is based on the work Tobias Frost did to update it in buster-security (Debian LTS).
• I updated the Debian Kernel Handbook to use the Debian stylesheet. This is now in the live version but I haven't uploaded the package.
• I started backporting various kernel security fixes to the affected stable branches. These are not yet tested or submitted upstream.
• I fixed a regression in cpu_rmap in the Linux kernel.
• I reported a regression in rtl8192 on Linux stable branches.
• I co-organised the Debian release party in Leuven. and posted a group photo of this on Mastodon.
• The amdgpu driver lists some firmware files as potentially needed that aren't packaged or even publicly available, which leads to warnings from initramfs-tools on systems using this driver. I queried these upstream, which should hopefully lead to a resolution of the bug.
• I wrote the arm, mips, and riscv parts of the fix for CVE-2023-3269 a.k.a. StackRot.

Like each month, have a look at the work funded by Freexian s Debian LTS offering.

Debian LTS contributors In June, 17 contributors have been paid to work on Debian LTS, their reports are available:

• Abhijith PA did 12.0h (out of 6.0h assigned and 8.0h from previous period), thus carrying over 2.0h to the next month.
• Adrian Bunk did 28.0h (out of 0h assigned and 34.5h from previous period), thus carrying over 6.5h to the next month.
• Anton Gladky did 5.0h (out of 6.0h assigned and 9.0h from previous period), thus carrying over 10.0h to the next month.
• Bastien Roucari s did 17.0h (out of 17.0h assigned and 3.0h from previous period), thus carrying over 3.0h to the next month.
• Ben Hutchings did 24.0h (out of 16.5h assigned and 7.0h from previous period).
• Chris Lamb did 18.0h (out of 18.0h assigned).
• Emilio Pozuelo Monfort did 24.0h (out of 21.0h assigned and 2.5h from previous period).
• Guilhem Moulin did 20.0h (out of 20.0h assigned).
• Lee Garrett did 25.0h (out of 0h assigned and 40.5h from previous period), thus carrying over 15.5h to the next month.
• Markus Koschany did 23.5h (out of 23.5h assigned).
• Ola Lundqvist did 13.0h (out of 0h assigned and 24.0h from previous period), thus carrying over 11.0h to the next month.
• Roberto C. S nchez did 13.5h (out of 9.75h assigned and 13.75h from previous period), thus carrying over 10.0h to the next month.
• Santiago Ruano Rinc n did 8.25h (out of 23.5h assigned), thus carrying over 15.25h to the next month.
• Sylvain Beucler did 20.0h (out of 23.5h assigned), thus carrying over 3.5h to the next month.
• Thorsten Alteholz did 14.0h (out of 14.0h assigned).
• Tobias Frost did 16.0h (out of 16.0h assigned).
• Utkarsh Gupta did 0.0h (out of 0h assigned and 25.5h from previous period), thus carrying over 25.5h to the next month.

Evolution of the situation In June, we have released 40 DLAs. Notable security updates in June included mariadb-10.3, openssl, and golang-go.crypto. The mariadb-10.3 package was synchronized with the latest upstream maintenance release, version 10.3.39. The openssl package was patched to correct several flaws with certificate validation and with object identifier parsing. Finally, the golang-go.crypto package was updated to address several vulnerabilities, and several associated Go packages were rebuilt in order to properly incorporate the update. LTS contributor Sylvain has been hard at work with some behind-the-scenes improvements to internal tooling and documentation. His efforts are helping to improve the efficiency of all LTS contributors and also helping to improve the quality of their work, making our LTS updates more timely and of higher quality. LTS contributor Lee Garrett began working on a testing framework specifically for Samba. Given the critical role which Samba plays in many deployments, the tremendous impact which regressions can have in those cases, and the unique testing requirements of Samba, this work will certainly result in increased confidence around our Samba updates for LTS. LTS contributor Emilio Pozuelo Monfort has begun preparatory work for the upcoming Firefox ESR version 115 release. Firefox ESR (and the related Thunderbird ESR) requires special work to maintain up to date in LTS. Mozilla do not release individual patches for CVEs, and our policy is to incorporate new ESR releases from Mozilla into LTS. Most updates are minor updates, but once a year Mozilla will release a major update as they move to a new major version for ESR. The update to a new major ESR version entails many related updates to toolchain and other packages. The preparations that Emilio has begun will ensure that once the 115 ESR release is made, updated packages will be available in LTS with minimal delay. Another highlight of behind-the-scenes work is our Front Desk personnel. While we often focus on the work which results in published package updates, much work is also involved in reviewing new vulnerabilities and triaging them (i.e., determining if they affect one or more packages in LTS and then determining the severity of those which are applicable). These intrepid contributors (Emilio Pozuelo Monfort, Markus Koschany, Ola Lundqvist, Sylvain Beucler, and Thorsten Alteholz for the month of June) reviewed dozens of vulnerabilities and made decisions about how those vulnerabilities should be dealt with.

Thanks to our sponsors

• Platinum sponsors:
  • TOSHIBA (for 94 months)
  • Civil Infrastructure Platform (CIP) (for 62 months)
• Gold sponsors:
  • Roche Diagnostics International AG (for 105 months)
  • Linode (for 99 months)
  • Babiel GmbH (for 88 months)
  • Plat Home (for 88 months)
  • University of Oxford (for 44 months)
  • Deveryware (for 31 months)
  • VyOS Inc (for 26 months)
  • EDF SA (for 15 months)
• Silver sponsors:
  • Domeneshop AS (for 109 months)
  • Nantes M tropole (for 103 months)
  • Univention GmbH (for 95 months)
  • Universit Jean Monnet de St Etienne (for 95 months)
  • Ribbon Communications, Inc. (for 89 months)
  • Exonet B.V. (for 79 months)
  • Leibniz Rechenzentrum (for 73 months)
  • CINECA (for 62 months)
  • Minist re de l Europe et des Affaires trang res (for 56 months)
  • Cloudways Ltd (for 46 months)
  • Dinahosting SL (for 44 months)
  • Bauer Xcel Media Deutschland KG (for 38 months)
  • Platform.sh (for 38 months)
  • Moxa Inc. (for 32 months)
  • sipgate GmbH (for 29 months)
  • OVH US LLC (for 27 months)
  • Tilburg University (for 27 months)
  • GSI Helmholtzzentrum f r Schwerionenforschung GmbH (for 18 months)
  • Soliton Systems K.K. (for 16 months)
• Bronze sponsors:
  • Evolix (for 110 months)
  • Seznam.cz, a.s. (for 110 months)
  • Intevation GmbH (for 107 months)
  • Linuxhotel GmbH (for 107 months)
  • Daevel SARL (for 105 months)
  • Bitfolk LTD (for 104 months)
  • Megaspace Internet Services GmbH (for 104 months)
  • Greenbone AG (for 103 months)
  • NUMLOG (for 103 months)
  • WinGo AG (for 103 months)
  • Ecole Centrale de Nantes - LHEEA (for 99 months)
  • Entr ouvert (for 94 months)
  • Adfinis AG (for 91 months)
  • GNI MEDIA (for 86 months)
  • Laboratoire LEGI - UMR 5519 / CNRS (for 86 months)
  • Tesorion (for 86 months)
  • Bearstech (for 77 months)
  • LiHAS (for 77 months)
  • Catalyst IT Ltd (for 72 months)
  • Supagro (for 67 months)
  • Demarcq SAS (for 66 months)
  • Universit Grenoble Alpes (for 52 months)
  • TouchWeb SAS (for 44 months)
  • SPiN AG (for 41 months)
  • CoreFiling (for 36 months)
  • Institut des sciences cognitives Marc Jeannerod (for 31 months)
  • Observatoire des Sciences de l Univers de Grenoble (for 28 months)
  • Tem Innovations GmbH (for 22 months)
  • WordFinder.pro (for 22 months)
  • CNRS DT INSU R sif (for 21 months)
  • Alter Way (for 14 months)
  • Institut Camille Jordan (for 3 months)

Welcome to the June 2023 report from the Reproducible Builds project In our reports, we outline the most important things that we have been up to over the past month. As always, if you are interested in contributing to the project, please visit our Contribute page on our website.

---

We are very happy to announce the upcoming Reproducible Builds Summit which set to take place from October 31st November 2nd 2023, in the vibrant city of Hamburg, Germany. Our summits are a unique gathering that brings together attendees from diverse projects, united by a shared vision of advancing the Reproducible Builds effort. During this enriching event, participants will have the opportunity to engage in discussions, establish connections and exchange ideas to drive progress in this vital field. Our aim is to create an inclusive space that fosters collaboration, innovation and problem-solving. We are thrilled to host the seventh edition of this exciting event, following the success of previous summits in various iconic locations around the world, including Venice, Marrakesh, Paris, Berlin and Athens. If you re interesting in joining us this year, please make sure to read the event page] which has more details about the event and location. (You may also be interested in attending PackagingCon 2023 held a few days before in Berlin.)

---

This month, Vagrant Cascadian will present at FOSSY 2023 on the topic of Breaking the Chains of Trusting Trust:

Corrupted build environments can deliver compromised cryptographically signed binaries. Several exploits in critical supply chains have been demonstrated in recent years, proving that this is not just theoretical. The most well secured build environments are still single points of failure when they fail. [ ] This talk will focus on the state of the art from several angles in related Free and Open Source Software projects, what works, current challenges and future plans for building trustworthy toolchains you do not need to trust.

Hosted by the Software Freedom Conservancy and taking place in Portland, Oregon, FOSSY aims to be a community-focused event: Whether you are a long time contributing member of a free software project, a recent graduate of a coding bootcamp or university, or just have an interest in the possibilities that free and open source software bring, FOSSY will have something for you . More information on the event is available on the FOSSY 2023 website, including the full programme schedule.

---

Marcel Fourn , Dominik Wermke, William Enck, Sascha Fahl and Yasemin Acar recently published an academic paper in the 44th IEEE Symposium on Security and Privacy titled It s like flossing your teeth: On the Importance and Challenges of Reproducible Builds for Software Supply Chain Security . The abstract reads as follows:

The 2020 Solarwinds attack was a tipping point that caused a heightened awareness about the security of the software supply chain and in particular the large amount of trust placed in build systems. Reproducible Builds (R-Bs) provide a strong foundation to build defenses for arbitrary attacks against build systems by ensuring that given the same source code, build environment, and build instructions, bitwise-identical artifacts are created.

However, in contrast to other papers that touch on some theoretical aspect of reproducible builds, the authors paper takes a different approach. Starting with the observation that much of the software industry believes R-Bs are too far out of reach for most projects and conjoining that with a goal of to help identify a path for R-Bs to become a commonplace property , the paper has a different methodology:

We conducted a series of 24 semi-structured expert interviews with participants from the Reproducible-Builds.org project, and iterated on our questions with the reproducible builds community. We identified a range of motivations that can encourage open source developers to strive for R-Bs, including indicators of quality, security benefits, and more efficient caching of artifacts. We identify experiences that help and hinder adoption, which heavily include communication with upstream projects. We conclude with recommendations on how to better integrate R-Bs with the efforts of the open source and free software community.

A PDF of the paper is now available, as is an entry on the CISPA Helmholtz Center for Information Security website and an entry under the TeamUSEC Human-Centered Security research group.

---

On our mailing list this month:

• Martin Monperrus asked whether there are any project[s] where reproducibility is checked in a continuous integration pipeline? which received a number of replies from various projects.
• Vagrant Cascadian mentioned that Packaging Con 2023 is being held in Berlin, the weekend before the Reproducible Builds summit later this year. In particular, Vagrant noticed that the Call for Proposals (CFP) closes at the end of July.
• Larry Doolittle was searching Usenet archives and discovered a thread from December 1999 titled Time independent checksum(cksum) on comp.unix.programming. Larry notes that it starts with Jayan asking about comparing binaries that might have difference in their embedded timestamps (that is, perhaps, Foreshadowing diffoscope, amiright? ) and goes on to observe that:

The antagonist is David Schwartz, who correctly says There are dozens of complex reasons why what seems to be the same sequence of operations might produce different end results, but goes on to say I totally disagree with your general viewpoint that compilers must provide for reproducability [sic]. Dwight Tovey and I (Larry Doolittle) argue for reproducible builds. I assert Any program especially a mission-critical program like a compiler that cannot reproduce a result at will is broken. Also it s commonplace to take a binary from the net, and check to see if it was trojaned by attempting to recreate it from source.

---

Lastly, there were a few changes to our website this month too, including Bernhard M. Wiedemann adding a simplified Rust example to our documentation about the SOURCE_DATE_EPOCH environment variable [ ], Chris Lamb made it easier to parse our summit announcement at a glance [ ], Mattia Rizzolo added the summit announcement at a glance [ ] itself [ ][ ][ ] and Rahul Bajaj added a taxonomy of variations in build environments [ ].

---

Distribution work 27 reviews of Debian packages were added, 40 were updated and 8 were removed this month adding to our knowledge about identified issues. A new randomness_in_documentation_generated_by_mkdocs toolchain issue was added by Chris Lamb [ ], and the deterministic flag on the paths_vary_due_to_usrmerge issue as we are not currently testing usrmerge issues [ ] issues.
Roland Clobus posted his 18th update of the status of reproducible Debian ISO images on our mailing list. Roland reported that all major desktops build reproducibly with bullseye, bookworm, trixie and sid , but he also mentioned amongst many changes that not only are the non-free images being built (and are reproducible) but that the live images are generated officially by Debian itself. [ ]
Jan-Benedict Glaw noticed a problem when building NetBSD for the VAX architecture. Noting that Reproducible builds [are] probably not as reproducible as we thought , Jan-Benedict goes on to describe that when two builds from different source directories won t produce the same result and adds various notes about sub-optimal handling of the CFLAGS environment variable. [ ]
F-Droid added 21 new reproducible apps in June, resulting in a new record of 145 reproducible apps in total. [ ]. (This page now sports missing data for March May 2023.) F-Droid contributors also reported an issue with broken resources in APKs making some builds unreproducible. [ ]
Bernhard M. Wiedemann published another monthly report about reproducibility within openSUSE

---

Upstream patches

• Bernhard M. Wiedemann:
  • bcachefs (sort find / filesys)
  • build-compare (reports files as identical)
  • build-time (toolchain date)
  • cockpit (merged, gzip mtime)
  • gcc13 (gcc13 toolchain LTO parallelism)
  • ghc-rpm-macros (toolchain parallelism)
  • golangcli-lint (date)
  • gutenprint (date+time)
  • mage (date (golang))
  • mumble (filesys)
  • pcr (date)
  • python-nss (drop sphinx .doctrees)
  • python310 (merged, bisected+backported)
  • warpinator (merged, date)
  • xroachng (date)
• Chris Lamb:
  • #1037159 filed against elinks.
  • #1037205 filed against multipath-tools.
  • #1037216 filed against mkdocstrings-python-handlers.
  • #1038730 filed against fribidi.
  • #1038957 filed against jtreg7.
  • #1039932 filed against python-bitstring (forwarded upstream).
• Vagrant Cascadian:
  • #1037235 filed against gradle-kotlin-dsl.
  • #1037240 filed against libsdl-console.
  • #1037267 filed against kawari8.
  • #1037269 filed against freetds.
  • #1037272 filed against gbrowse.
  • #1037276 filed against bglibs.
  • #1037277 filed against advi.
  • #1037278 filed against afterstep.
  • #1037280 filed against simstring.
  • #1037296 filed against manderlbot.
  • #1037298 filed against erlang-proper.
  • #1037300 filed against comedilib.
  • #1037309 filed against libint.
  • #1037427 filed against newlib.
  • #1038908 filed against binutils-msp430.
  • #1038970 & #1038971 filed against c-munipack.
  • #1039044 filed against python-marshmallow-sqlalchemy.
  • #1039457 filed against mplayer.
  • #1039493 & #1039500 filed against menu.
  • #1039506 filed against mini-buildd.
  • #1039610 filed against pnetcdf.
  • #1039617 & #1039618 filed against liblopsub.
  • #1039619 filed against wcc.
  • #1039623 filed against shotcut.
  • #1039624 filed against icu.
  • #1039741 filed against libapache-poi-java.
  • #1039808 filed against atf.
  • #1039865 filed against valgrind.

---

Testing framework The Reproducible Builds project operates a comprehensive testing framework (available at tests.reproducible-builds.org) in order to check packages and other artifacts for reproducibility. In June, a number of changes were made by Holger Levsen, including:

• Additions to a (relatively) new Documented Jenkins Maintenance (djm) script to automatically shrink a cache & save a backup of old data [ ], automatically split out previous months data from logfiles into specially-named files [ ], prevent concurrent remote logfile fetches by using a lock file [ ] and to add/remove various debugging statements [ ].
• Updates to the automated system health checks to, for example, to correctly detect new kernel warnings due to a wording change [ ] and to explicitly observe which old/unused kernels should be removed [ ]. This was related to an improvement so that various kernel issues on Ubuntu-based nodes are automatically fixed. [ ]

Holger and Vagrant Cascadian updated all thirty-five hosts running Debian on the amd64, armhf, and i386 architectures to Debian bookworm, with the exception of the Jenkins host itself which will be upgraded after the release of Debian 12.1. In addition, Mattia Rizzolo updated the email configuration for the @reproducible-builds.org domain to correctly accept incoming mails from jenkins.debian.net [ ] as well as to set up DomainKeys Identified Mail (DKIM) signing [ ]. And working together with Holger, Mattia also updated the Jenkins configuration to start testing Debian trixie which resulted in stopped testing Debian buster. And, finally, Jan-Benedict Glaw contributed patches for improved NetBSD testing.

---

If you are interested in contributing to the Reproducible Builds project, please visit our Contribute page on our website. However, you can get in touch with us via:

• IRC: #reproducible-builds on irc.oftc.net.
• Mailing list: rb-general@lists.reproducible-builds.org
• Twitter: @ReproBuilds

Reduce the size of your c: partition to the smallest it can be and then turn off windows with the understanding that you will never boot this system on the iron ever again.
Boot into a netinst installer image (no GUI). hold alt and press left arrow a few times until you get to a prompt to press enter. Press enter. In this example /dev/sda is your windows disk which contains the c: partition
and /dev/disk/by-id/usb0 is the USB-3 attached SATA controller that you have your SSD attached to (please find an example attached). This SSD should be equal to or larger than the windows disk for best compatability. To find the literal path names of your detected drives you can run fdisk -l. Pay attention to the names of the partitions and the sizes of the drives to help determine which is which. Once you have a shell in the netinst installer, you should maybe be able to run a command like the following. This will duplicate the disk located at if (in file) to the disk located at of (out file) while showing progress as the status.

dd if=/dev/sda of=/dev/disk/by-id/usb0 status=progress

If you confirm that dd is available on the netinst image and the previous command runs successfully, test that your windows partition is visible in the new disk s partition table. The start block of the windows partition on each should match, as should the partition size.

fdisk -l /dev/disk/by-id/usb0
fdisk -l /dev/sda

If the output from the first is the same as the output from the second, then you are probably safe to proceed. Once you confirm that you have made and tested a full copy of the blocks from your windows drive saved on your usb disk, nuke your windows partition table from orbit.

dd if=/dev/zero of=/dev/sda bs=1M count=42

You can press alt-f1 to return to the Debian installer now. Follow the instructions to install Debian. Don t forget to remove all attached USB drives. Once you install Debian, press ctrl-alt-f3 to get a root shell. Add your user to the sudoers group:

# adduser cjac sudoers

log out

# exit

log in as your user and confirm that you have sudo

$ sudo ls

Don t forget to read the spider man advice enter your password you ll need to install virt-manager. I think this should help:

$ sudo apt-get install virt-manager libvirt-daemon-driver-qemu qemu-system-x86

insert the USB drive. You can now create a qcow2 file for your virtual machine.

$ sudo qemu-img convert -O qcow2 \
/dev/disk/by-id/usb0 \
/var/lib/libvirt/images/windows.qcow2

I personally create a volume group called /dev/vg00 for the stuff I want to run raw and instead of converting to qcow2 like all of the other users do, I instead write it to a new logical volume.

sudo lvcreate /dev/vg00 -n windows -L 42G # or however large your drive was
sudo dd if=/dev/disk/by-id/usb0 of=/dev/vg00/windows status=progress

Now that you ve got the qcow2 file created, press alt-left until you return to your GDM session. The apt-get install command above installed virt-manager, so log in to your system if you haven t already and open up gnome-terminal by pressing the windows key or moving your mouse/gesture to the top left of your screen. Type in gnome-terminal and either press enter or click/tap on the icon. I like to run this full screen so that I feel like I m in a space ship. If you like to feel like you re in a spaceship, too, press F11. You can start virt-manager from this shell or you can press the windows key and type in virt-manager and press enter. You ll want the shell to run commands such as virsh console windows or virsh list When virt-manager starts, right click on QEMU/KVM and select New.
In the New VM window, select Import existing disk image
When prompted for the path to the image, use the one we created with sudo qemu-img convert above.
Select the version of Windows you want.
Select memory and CPUs to allocate to the VM.
Tick the Customize configuration before install box
If you re prompted to enable the default network, do so now.
The default hardware layout should probably suffice. Get it as close to the underlying hardware as it is convenient to do. But Windows is pretty lenient these days about virtualizing licensed windows instances so long as they re not running in more than one place at a time. Good luck! Leave comments if you have questions.